Samsung Galaxy S4 Ntt docomo SC-04E (access denied new security) Unlock Done by Z3x
ACTION TAKEN
1.Open Samsung 3G Tool
2.Select model SC-04E
3.Select com port in port setting
4.Press *#7284# Select UART to modem
5.Back to dial window
6.Press *#0808# Select AP (in USB settings) Select DM+MODEM+ADB
7.Press *#9090# Select DM over UART
8.Connect unit Select correct model & port tick unlock
Pag unlock eto lang lumabas access denied new security pala ang unit..

SOLUTION IS DOWNGRADE
SC04EOMUAMI1 downgrade to SC04EOMUAMDI
1.Download this firmware...http://fs1.d-h.st/download/00086/Snf...CMAMDI_DCM.zip
2.USE ODIN3 V3.70 marami kay uncle http://www.google.com/
3.Extract firmware
4.Turn off unit Hold volume down,home & power
5.Click volume up For download mode
6.open odin and select PDA
7.Connect unit and tick start
8.Wait until success


Unlock again after flash PDA
PROCEDURE
1.Open Samsung 3G Tool
2.Select model SC-04E
3.Select com port in port setting
4.Press *#7284# Select UART to modem
5.Back to dial window
6.Press *#0808# Select AP (in USB settings) Select DM+MODEM+ADB
7.Press *#9090# Select DM over UART
8.Connect unit Select correct model & port tick read codes
9.Insert unaccepted sim card and enter NET LOCK

FINISH PRODUCT



NOTE: After unlock upgare mo ulit sa dating Build para di mag hahang...
PROBLEM
Lock to ntt docomo
Lock to ntt docomo
ACTION TAKEN
1.Open Samsung 3G Tool
2.Select model SC-04E
3.Select com port in port setting
4.Press *#7284# Select UART to modem
5.Back to dial window
6.Press *#0808# Select AP (in USB settings) Select DM+MODEM+ADB
7.Press *#9090# Select DM over UART
8.Connect unit Select correct model & port tick unlock
Pag unlock eto lang lumabas access denied new security pala ang unit..

SOLUTION IS DOWNGRADE
SC04EOMUAMI1 downgrade to SC04EOMUAMDI
1.Download this firmware...http://fs1.d-h.st/download/00086/Snf...CMAMDI_DCM.zip
2.USE ODIN3 V3.70 marami kay uncle http://www.google.com/
3.Extract firmware
4.Turn off unit Hold volume down,home & power
5.Click volume up For download mode
6.open odin and select PDA
7.Connect unit and tick start
8.Wait until success


Unlock again after flash PDA
PROCEDURE
1.Open Samsung 3G Tool
2.Select model SC-04E
3.Select com port in port setting
4.Press *#7284# Select UART to modem
5.Back to dial window
6.Press *#0808# Select AP (in USB settings) Select DM+MODEM+ADB
7.Press *#9090# Select DM over UART
8.Connect unit Select correct model & port tick read codes
9.Insert unaccepted sim card and enter NET LOCK

FINISH PRODUCT



NOTE: After unlock upgare mo ulit sa dating Build para di mag hahang...