Samsung Galaxy y GT-S5360 IMEI ----------- Done
Status
Procedure and tools you can Download Here [TUT]Samsung GALAXY Y GT-S5360 Samsung logo only done via Odin3
Logs
Code:
<ID:0/021> Added!! <ID:0/021> Removed!! <ID:0/021> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> DefaultCalDataWithBoot_S5360XXKI6_REV05.tar.md5 is valid. <OSM> PDA_S5360XXKI6_REV05.tar.md5 is valid. <OSM> MODEM_S5360XXKI6_REV05.tar.md5 is valid. <OSM> GT-S5360-MULTI-CSC-OXXKI6.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/021> Odin v.3 engine (ID:21).. <ID:0/021> File analysis.. <ID:0/021> SetupConnection.. <ID:0/021> Initialzation.. <ID:0/021> Set PIT file.. <ID:0/021> DO NOT TURN OFF TARGET!! <ID:0/021> Get PIT for mapping.. <ID:0/021> Firmware update start.. <ID:0/021> BcmBoot.img <ID:0/021> NAND Write Start!! <ID:0/021> HEDGE_NVRAM8_RF_LE.bin <ID:0/021> sysparm_dep.img <ID:0/021> Sbl.bin <ID:0/021> boot.img <ID:0/021> system.img <ID:0/021> userdata.img <ID:0/021> param.lfs <ID:0/021> BcmCP.img <ID:0/021> Transmission Complete.. <ID:0/021> Now Writing.. Please wait about 2 minutes <ID:0/021> Receive Response form LOKE <ID:0/021> csc.rfs <ID:0/021> RQT_CLOSE !! <ID:0/021> RES OK !! <ID:0/021> Completed.. <OSM> All threads completed. (succeed 1 / failed 0) <ID:0/021> Removed!! <ID:0/022> Added!! <ID:1/023> Added!! <ID:1/023> Removed!! <ID:0/022> Removed!!
Finish Product
Status
Procedure and tools you can Download Here [TUT]Samsung GALAXY Y GT-S5360 Samsung logo only done via Odin3
Logs
Code:
<ID:0/021> Added!! <ID:0/021> Removed!! <ID:0/021> Added!! <OSM> Enter CS for MD5.. <OSM> Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> DefaultCalDataWithBoot_S5360XXKI6_REV05.tar.md5 is valid. <OSM> PDA_S5360XXKI6_REV05.tar.md5 is valid. <OSM> MODEM_S5360XXKI6_REV05.tar.md5 is valid. <OSM> GT-S5360-MULTI-CSC-OXXKI6.tar.md5 is valid. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/021> Odin v.3 engine (ID:21).. <ID:0/021> File analysis.. <ID:0/021> SetupConnection.. <ID:0/021> Initialzation.. <ID:0/021> Set PIT file.. <ID:0/021> DO NOT TURN OFF TARGET!! <ID:0/021> Get PIT for mapping.. <ID:0/021> Firmware update start.. <ID:0/021> BcmBoot.img <ID:0/021> NAND Write Start!! <ID:0/021> HEDGE_NVRAM8_RF_LE.bin <ID:0/021> sysparm_dep.img <ID:0/021> Sbl.bin <ID:0/021> boot.img <ID:0/021> system.img <ID:0/021> userdata.img <ID:0/021> param.lfs <ID:0/021> BcmCP.img <ID:0/021> Transmission Complete.. <ID:0/021> Now Writing.. Please wait about 2 minutes <ID:0/021> Receive Response form LOKE <ID:0/021> csc.rfs <ID:0/021> RQT_CLOSE !! <ID:0/021> RES OK !! <ID:0/021> Completed.. <OSM> All threads completed. (succeed 1 / failed 0) <ID:0/021> Removed!! <ID:0/022> Added!! <ID:1/023> Added!! <ID:1/023> Removed!! <ID:0/022> Removed!!
Finish Product