Branch: Samsung
Model: Galxy Note3 SM-N9005
Tools: Odin click here
Diver: samsung driver click here
N9005ZSUGPJ2-4Files-5.0
click here
or here
Please flash this firmware carefully following below instructions step by step-
Download Latest version SPFlash Tools from Website.
Extract the downloaded Archive into your computer using any Compressor Tool.
Download the Firmware that matches the Model and Brand of your smartphone.
Extract it in Your Computer.
Install MTK VCOM USB Driver and install it in your pc. To be informed that, Different windows version do not supports same Drivers.
So download Driver that supports your Computer OS.
Now Open SPFlashTool On Your Pc.
Load Scatter File From Extracted Firmware Location.
Click on “Download And Update†Button.
Now Turn of your Phone and Connect it with Your PC VIA USB Cable
The flash Process will start. You have to wait at least 10 minutes. Some latest phone takes much longer time before
completion the process.
After the completion of the process, you will see a Green TIC.
Now unplug USB cable and Turn on the phone.
To be informed, first time start-up after flash
will take at least 15 minutes to start completely.
feel free to click THANKS BUTTON
and comment down below if this thread is
useful
Model: Galxy Note3 SM-N9005
Tools: Odin click here
Diver: samsung driver click here
N9005ZSUGPJ2-4Files-5.0
- Check if your device charge is at least 50%. If it is below 50%, don’t start the Flashing process.
- Check your device model, chipset with the downloaded firmware’s twice.
- Brand Name: Samsung
- FirmwareVersion: N9005ZSUGPJ2-4Files-5.0
- File size: 1.32 GB
- Version: GALAXY NOTE 3 LTE
- Download Link:
click here
or here
Please flash this firmware carefully following below instructions step by step-
Download Latest version SPFlash Tools from Website.
Extract the downloaded Archive into your computer using any Compressor Tool.
Download the Firmware that matches the Model and Brand of your smartphone.
Extract it in Your Computer.
Install MTK VCOM USB Driver and install it in your pc. To be informed that, Different windows version do not supports same Drivers.
So download Driver that supports your Computer OS.
Now Open SPFlashTool On Your Pc.
Load Scatter File From Extracted Firmware Location.
Click on “Download And Update†Button.
Now Turn of your Phone and Connect it with Your PC VIA USB Cable
The flash Process will start. You have to wait at least 10 minutes. Some latest phone takes much longer time before
completion the process.
After the completion of the process, you will see a Green TIC.
Now unplug USB cable and Turn on the phone.
To be informed, first time start-up after flash
will take at least 15 minutes to start completely.
feel free to click THANKS BUTTON
and comment down below if this thread is
useful
