Samsung GT-I8150 Ram Dump Mode Done

[LORDCELTECH]

Samsung GT-I8150 Ram Dump Mode Done​

Problem
Ram Dump Mode

Tools To Be Used
OCTOPUS / MEDUSA
5310 usb cable


Action Taken

Flash In Octopus DONE No LUCK

Platform: Samsung Android
Selected port: COM8
Selected model: GT-I8150
Phone was not found on the selected port!
Searching for USB diagnostic port...
No diagnostic ports found!
Connecting to phone on COM22
Phone connection failed
Connecting to phone on COM8
Phone connection failed
Selected firmware file: I8150ZCLL1_I8150OZHLL1_CHN_Android_
2.3.6.oct
Please switch your phone to the download mode and connect it to a 
PC.
To put GT-I8150 phone into download mode you have to perform the 
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume-" +"Power"+''Home"  buttons.
Searching for a phone. Please wait...
Found phone on 
Firmware write started.
Writing amss.mbn section...
amss.mbn section has been written successfully.
Writing adsp.mbn section...
adsp.mbn section has been written successfully.
Writing boot.img section...
boot.img section has been written successfully.
Writing system.img.ext4 section...
system.img.ext4 section has been written successfully.
Writing cache.img.ext4 section...
cache.img.ext4 section has been written successfully.
Writing recovery.img section...
recovery.img section has been written successfully.
Writing persist.img.ext4 section...
persist.img.ext4 section has been written successfully.
Writing preload.img.ext4 section...
preload.img.ext4 section has been written successfully.
Please, restart the phone to apply changes
[COLOR="Red"][B]Firmware writing successfully completed[/B][/COLOR].

No LUCK





JTAG MEDUSA


DONE In JTAG MEDUSA

Welcome to Medusa Box Software version 2.1.8
Connecting to server
Retrieving files list
Downloading file "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTI8150_Repair.mf"...
Canceled...
Connecting to server
Retrieving files list
Downloading file "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTI8150_Repair.mf"...
Canceled...
Selected device model: Samsung GT-I8150
Connecting. Please wait...
Resetting target. Please wait...
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision C.
Detected TAP ID: 27B360E1, IR Length = 5.
JTAG speed  : Auto (RTCK).
VREF level  : 1.79 V
CPU         : Qualcomm MSM8255T
Core ID     : 2057A0E1
Storage Device: Sandisk eMMC SEM04G
Device ID     : 00450001
 Block size   : 512 bytes
 Blocks       : 7733248
 Storage size : 3776 Mb
Opening "C:\Documents and Settings\Lordceltech\Desktop\GT-I8150 [Medusa]\SAMSUNG_GTI8150_Repair.mf" file...
Writing PARTITION section. Please wait... Done
Writing BOOT section. Please wait... Done
Writing DATA section. Please wait... Done
Disconnected
[COLOR="Red"][B]Repair done.[/B][/COLOR]

DONE

imageshack PROBLEM
if you have a problem in picture procedure please sign in here to view the pic. ImageShack® - Register then refresh the forum site that's it.

NOTE
wag madaliin ang pag gawa ng thread eto ay ayusin para madali eto maintindihan ng members. eto ay review maigi para maganda ang kalabasan
kung wala detalye o procedure huwag na gawan ng post/thread hindi nakakatulong eto.