dudeskie27
Expired Account
gadang umaga po sa inyo all ito po yung need kong esaktong flash file MT6580__J3__P10__ALPS.L1.MP6.V2_DROI6580.WEG.L__Android_8.0 sana may ganito po mag share sakin thanks po 
info :
Operation : Check / Read Info [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040503A24250A1C9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040503A24250A1C9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x5E7E112207F140EDED5C8D1D6A37275D
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : J3
ProdName : J3
ProdModel : P10
Device : J3
AndroidVer: 8.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_DROI6580.WEG.L
SECURITY :
IMEI_SW [1] : 355715064835832
IMEI_SW [2] : 355715064835840
BTMAC Addr : 12345678A733
WiFi MAC : 002E46DBE9C3
MODEM :
BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P5_1_wg_n
EXTRA :
LCD : Not info available
LCD Res : 960x540
TOUCH [0] : ft3427_zaw875
CAM [0] : ov9760_mipi_raw
CAM [1] : ov9760sub_mipi_raw
CAM [2] : ov9762_mipi_raw
CAM [3] : ov9762sub_mipi_raw
MODEM : k90_we_l_hspa_1258
LOCALE : en_US zh_CN tl_PH
Done!
Elapsed: 00:00:22
Reconnect Power/Cable!
info :
Operation : Check / Read Info [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 3 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164040503A24250A1C9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040503A24250A1C9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0x5E7E112207F140EDED5C8D1D6A37275D
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : J3
ProdName : J3
ProdModel : P10
Device : J3
AndroidVer: 8.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6.V2_DROI6580.WEG.L
SECURITY :
IMEI_SW [1] : 355715064835832
IMEI_SW [2] : 355715064835840
BTMAC Addr : 12345678A733
WiFi MAC : 002E46DBE9C3
MODEM :
BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V6_P5_1_wg_n
EXTRA :
LCD : Not info available
LCD Res : 960x540
TOUCH [0] : ft3427_zaw875
CAM [0] : ov9760_mipi_raw
CAM [1] : ov9760sub_mipi_raw
CAM [2] : ov9762_mipi_raw
CAM [3] : ov9762sub_mipi_raw
MODEM : k90_we_l_hspa_1258
LOCALE : en_US zh_CN tl_PH
Done!
Elapsed: 00:00:22
Reconnect Power/Cable!