1. Write Combination Firmware, (available on Support).
2. After Flash, Phone will enter "Safe Mode".
3. Go to Settings, "Developer Options" in phone Settings. Enable USB debug.
4.Make Factory Data reset. (Note: Phone will still be in "Safe Mode" even if you restart).
5.Reflash the Phone with Full Stock Firmware, (Available on Support).
6.Connect powered on Phone to PC. Click reset FRP, Follow on screen instructions carefully.
7.Done.
Note. Follow instructions carefully, No short-cuts. otherwise your phone will still be FRP locked.
Sorry no screenshots, pasa lang ng kapwa Tech. Rush.
2. After Flash, Phone will enter "Safe Mode".
3. Go to Settings, "Developer Options" in phone Settings. Enable USB debug.
4.Make Factory Data reset. (Note: Phone will still be in "Safe Mode" even if you restart).
5.Reflash the Phone with Full Stock Firmware, (Available on Support).
6.Connect powered on Phone to PC. Click reset FRP, Follow on screen instructions carefully.
7.Done.
Note. Follow instructions carefully, No short-cuts. otherwise your phone will still be FRP locked.
Sorry no screenshots, pasa lang ng kapwa Tech. Rush.
Code:
Welcome to Octoplus/Octopus Box Samsung software version 2.4.5
-----------------------------------------------------------------------------------
To connect SM-J710GN phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: J710GNDXU1APF2_J710GNOLB1APF1
_XME_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710GN into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.5 Software version.
Selected firmware file: COMBINATION_OLB_FA60_J710GN_DXU1APD5
_OLB1APD5.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710GN into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.5 Software version.
Selected firmware file: J710GNDXU1APF2_J710GNOLB1APF1
_XME_Android_6.0.1.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J710GN into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM13
Selected model: SM-J710GN
Searching for a phone (waiting for ADB device)...
Please, press "OK" button on the phone to allow USB debugging..
Reading info...
Detected phone model: SM-J710GN
Firmware compiled date: Thu Jun 2 23:11:38 KST 2016
PDA version: J710GNDXU1APF2
CSC version: J710GNOLB1APF1
SW version: J710GNDXU1APF1
Phone SN: RF8H529D7HY
Android version: 6.0.1 (MMB29K)
Sales code: XTC
Country: PHILIPPINES
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2016-05-01
Codename: j7xeltedx
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Backup and reset" and make "Factory data reset"
Performed by 2.4.5 Software version.
