Samsung N7000 unlock Done by OctopusBox[Reference]
History: Lock sa Smart
Software version: 2.3.6
Action Taken:
Downgrade to 2.3.5
Using flash file:N7000DDLB2_N7000ODDLA1
Ready your phone in Download Mode by pressing
Volume down + Home + Power on Button, then press Volume Up to continue.
Connect your PC and Phone via USB cable provided until COM port connected.
Once ready, load flash file
Click thub: Write Firmware
Welcome to Octopus Box Samsung software version 1.3.4
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
Selected firmware file: N7000DXKK1_N7000OLBKJ6_THL.oct
Please put your phone in download mode and connect to PC.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware writing successfully completed.
After Flash the Phone proceed to unlocking
Click thub: Unlock
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM38
Selected model: GT-N7000
Detected phone model: GT-N7000
HW Version: GT-N7000RWASMA
Phone IMEI: 352167-05-098047-4
Firmware compiled date: Thu Nov 3 21:16:22 KST 2011
Phone IMEI: 352167050980474
Android version: 2.3.5 (GINGERBREAD)
Unlocking phone...
Device will be rooted now. This process can take about 5-6 minutes.
Please, wait...
Phone IMEI: 352167050980474
Root privileges successfully obtained.
Unlocking phone. It can take some time. Please wait...
Phone is successfully unlocked
DONE
Software version: 2.3.6
Action Taken:
Downgrade to 2.3.5
Using flash file:N7000DDLB2_N7000ODDLA1
Ready your phone in Download Mode by pressing
Volume down + Home + Power on Button, then press Volume Up to continue.
Connect your PC and Phone via USB cable provided until COM port connected.
Once ready, load flash file
Click thub: Write Firmware
Welcome to Octopus Box Samsung software version 1.3.4
-----------------------------------------------------------------------------------
To connect GT-N7000 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
Selected firmware file: N7000DXKK1_N7000OLBKJ6_THL.oct
Please put your phone in download mode and connect to PC.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Firmware writing successfully completed.
After Flash the Phone proceed to unlocking
Click thub: Unlock
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM38
Selected model: GT-N7000
Detected phone model: GT-N7000
HW Version: GT-N7000RWASMA
Phone IMEI: 352167-05-098047-4
Firmware compiled date: Thu Nov 3 21:16:22 KST 2011
Phone IMEI: 352167050980474
Android version: 2.3.5 (GINGERBREAD)
Unlocking phone...
Device will be rooted now. This process can take about 5-6 minutes.
Please, wait...
Phone IMEI: 352167050980474
Root privileges successfully obtained.
Unlocking phone. It can take some time. Please wait...
Phone is successfully unlocked
DONE