SamSung NOte 4 N9006 Hang On Logo Solved With Only With Merapi Tool

[NEKNEKs]

SamSung NOte 4 N9006 Hang On Logo Solved With Only With Merapi Tool
Quote:
Flash files count is :13
Action : Firmware update.
Selected Acer: Liquid Z110
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM5)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6572_S00
EMMC: (29Gb+4096Mb) SANDISK 0x53454d303447
EMMC FW VERSION: 3a:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM (Android) (COM9)
Starting flash.
Send preloader...
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
FAT checksum is executing ...
After flash this firmware need to perform some aditional steps
1.Reinsert battery, keep VOL- and power on untill phone will come in factory mode
2.Select line EMMC, and after press home button.
3.Wait untill phone will restart and will stuck on logo(leave for 1 min in this stage).
4.If phone not power on, reinsert battery and perform direct unlock.
If repair fail, please contact us or report in forum to provide help.
Wait untill phone will start charging.
All done.

 

[taga_ayos]

pwde mka hingi fw nito sir ...slamat....

 

[AGS]

useful post thank you for sharing.

 

[dangerous26]

 

[taga_ayos]

sana may fw dito may clone ako dito baka parhas lng sila.....

 

[gerry_m]

thank you .....................

 

[Chubychubz]

Pa share po sana ng firmware na ginamit

 

[daryl_rasta]

any firmware bro?
thanks

 

[mr.kyri3]

urgent boss pa share ng firmware,maraming salamat...