Welcome to Cracked By Gautam Samsung software version 1.6.5
-----------------------------------------------------------------------------------
To connect GT-I9070 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
8. Press Home button.
9. Press "Read Info" in software.
TTaskMessageDialog requires Windows Vista or later
-----------------------------------------------------------------------------------
To connect SGH-S730M phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
Please, select firmware file first!
Selected firmware file: SGH-S730M_SW_LJ7.oct
Please put the phone into Download Mode and connect USB cable.
To put SGH-S730M into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing OEMSBL section...
OEMSBL section has been written successfully.
Writing APPSBL section...
APPSBL section has been written successfully.
Writing UNKNOWN section...
UNKNOWN section has been written successfully.
Writing QCSBL section...
QCSBL section has been written successfully.
Writing CFG_DATA section...
CFG_DATA section has been written successfully.
Writing OEMSBL section...
OEMSBL section has been written successfully.
Writing APPSBL section...
APPSBL section has been written successfully.
Writing UNKNOWN section...
UNKNOWN section has been written successfully.
Writing QCSBL section...
QCSBL section has been written successfully.
Writing CFG_DATA section...
CFG_DATA section has been written successfully.
Writing APPS section...
APPS section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing FAT section...
FAT section has been written successfully.
Writing FAT section...
FAT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
-----------------------------------------------------------------------------------
To connect GT-I9070 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "Modem" value.
8. Press Home button.
9. Press "Read Info" in software.
TTaskMessageDialog requires Windows Vista or later
-----------------------------------------------------------------------------------
To connect SGH-S730M phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
Please, select firmware file first!
Selected firmware file: SGH-S730M_SW_LJ7.oct
Please put the phone into Download Mode and connect USB cable.
To put SGH-S730M into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing OEMSBL section...
OEMSBL section has been written successfully.
Writing APPSBL section...
APPSBL section has been written successfully.
Writing UNKNOWN section...
UNKNOWN section has been written successfully.
Writing QCSBL section...
QCSBL section has been written successfully.
Writing CFG_DATA section...
CFG_DATA section has been written successfully.
Writing OEMSBL section...
OEMSBL section has been written successfully.
Writing APPSBL section...
APPSBL section has been written successfully.
Writing UNKNOWN section...
UNKNOWN section has been written successfully.
Writing QCSBL section...
QCSBL section has been written successfully.
Writing CFG_DATA section...
CFG_DATA section has been written successfully.
Writing APPS section...
APPS section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing FAT section...
FAT section has been written successfully.
Writing FAT section...
FAT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.