Sm-n900w8 5.0 unlock without root
Welcome to Octoplus/Octopus Box Samsung software version 2.6.1
To connect SM-N900W8 phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM181
Selected model: SM-N900W8
Reading info...
Phone was not found on the selected port!
Phone unlocking failed
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM182
Selected model: SM-N900W8
Reading info...
Mode: Normal
Firmware compiled date: Jan 21 2015
Firmware compiled time: 21:00:00
Firmware released date: Jul 26 2016
Firmware released time: 20:34:27
SW Version: MPSS.DI.2.0.c1-00109-M8974AAAAANAZM-1
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-N900W8
Firmware compiled date: Tue Jul 26 22:01:41 KST 2016
PDA version: N900W8VLU2DPG1
CSC version: N900W8OYADPG1
SW version: N900W8VLU2DPG1
Phone SN: RV1DA2K040H
Android version: 5.0 (LRX21V)
Sales code: TLS
Country: Canada
HW platform: msm8974
HW Chip: MSM8974
HW Modem: MSM8974
SIM 1 status: absent
Codename: hltevl
Checking Root:
Phone is not Rooted.
Unlocking phone...
Phone will restart now. Please don't disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.6.1 Software version.
Welcome to Octoplus/Octopus Box Samsung software version 2.6.1
To connect SM-N900W8 phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Restart phone.
11. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM181
Selected model: SM-N900W8
Reading info...
Phone was not found on the selected port!
Phone unlocking failed
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM182
Selected model: SM-N900W8
Reading info...
Mode: Normal
Firmware compiled date: Jan 21 2015
Firmware compiled time: 21:00:00
Firmware released date: Jul 26 2016
Firmware released time: 20:34:27
SW Version: MPSS.DI.2.0.c1-00109-M8974AAAAANAZM-1
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-N900W8
Firmware compiled date: Tue Jul 26 22:01:41 KST 2016
PDA version: N900W8VLU2DPG1
CSC version: N900W8OYADPG1
SW version: N900W8VLU2DPG1
Phone SN: RV1DA2K040H
Android version: 5.0 (LRX21V)
Sales code: TLS
Country: Canada
HW platform: msm8974
HW Chip: MSM8974
HW Modem: MSM8974
SIM 1 status: absent
Codename: hltevl
Checking Root:
Phone is not Rooted.
Unlocking phone...
Phone will restart now. Please don't disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.6.1 Software version.