SGH-T989 Galaxy SII UnlOcked [T-Mobile prOvider] * [DONE][Reference]
history:

To connect SGH-T989 phone you have to perform the following steps:
* Disconnect USB cable from phone.
* Go to Menu->Settings->Applications->Development.
* Turn on "USB Debugging" option.
* When message is appear press "Yes".
* Go to dial window.
* Enter "*#7284#" number.
* Set "USB" radio button to "Modem" value.
* Close window.
* Go to dial window.
* Enter "*#9090#" number.
* Set "Diag config" to "USB" value.
* Restart phone.
* Press "Read Info" in Octopus Samsung software.
* Press Unlock
* your done.....
read info...........
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-T989
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM360
Mode: Normal
Phone model: SGH-T989
Phone IMEI: 359605-04-319121-5
SW Version: T989UVLDE/T989UVLDE
HW Version: REV0.1
unlocking..............
Platform: Samsung Android
Selected port: COM360
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Phone IMEI: 359605-04-319121-5
SW Version: T989UVLDE/T989UVLDE
HW Version: REV0.1
Unlocking phone...
Switching to emergency mode...
Phone found
Deactivating MSL...
MSL deactivate successfully
Disconect phone and type *#9090# select USB mode.
Type *#7284# and select Modem.
Reboot phone and connect switched On phone to USB cable.
Searching for phone. Please wait...
Incorrect IMEI
SW Version: T989UVLDE/none
HW Version: None
Found phone on COM360
Phone is successfully unlocked
note: advice sa customer na mabubura ang mga nakasave sa phone mag Rerestore sa factory defaults ang unit
SGH-T989 Galaxy SII UnlOcked [T-Mobile prOvider]
history:

To connect SGH-T989 phone you have to perform the following steps:
* Disconnect USB cable from phone.
* Go to Menu->Settings->Applications->Development.
* Turn on "USB Debugging" option.
* When message is appear press "Yes".
* Go to dial window.
* Enter "*#7284#" number.
* Set "USB" radio button to "Modem" value.
* Close window.
* Go to dial window.
* Enter "*#9090#" number.
* Set "Diag config" to "USB" value.
* Restart phone.
* Press "Read Info" in Octopus Samsung software.
* Press Unlock
* your done.....
read info...........
Platform: Samsung Android
Selected port: COM1
Selected model: SGH-T989
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM360
Mode: Normal
Phone model: SGH-T989
Phone IMEI: 359605-04-319121-5
SW Version: T989UVLDE/T989UVLDE
HW Version: REV0.1
unlocking..............
Platform: Samsung Android
Selected port: COM360
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Phone IMEI: 359605-04-319121-5
SW Version: T989UVLDE/T989UVLDE
HW Version: REV0.1
Unlocking phone...
Switching to emergency mode...
Phone found
Deactivating MSL...
MSL deactivate successfully
Disconect phone and type *#9090# select USB mode.
Type *#7284# and select Modem.
Reboot phone and connect switched On phone to USB cable.
Searching for phone. Please wait...
Incorrect IMEI
SW Version: T989UVLDE/none
HW Version: None
Found phone on COM360
Phone is successfully unlocked
note: advice sa customer na mabubura ang mga nakasave sa phone mag Rerestore sa factory defaults ang unit