Kailangan may pocket wifi at Laptop
Here we go sundan mabuti
Step 1: Set up your laptop to be like a WiFi router.
1. Open Command Prompt
o Click the Start button.
o In the search box, type: cmd
o In the list of results, right-click “cmdâ€, and then click “Run as administratorâ€.
2. Verify if necessary drivers are installed:
o Type in Command Prompt: netsh wlan show drivers
o press “Enterâ€. If next to “Hosted Network Supported†is written “Yes†then everything is ok and you can go to next step. If it says “No†then you have to install drivers for it.
o Create a WiFi network with SSID = (name of your active vpn subscription) and password = administrator
Type in Command Prompt: netsh wlan set hostednetwork mode=allow ssid=(name of vpn) key=administrator
3. Start your Wi-Fi network:
Type in Command Prompt: netsh wlan start hostednetwork
You should receive the following result: the hosted network started
If you see the message “hosted network couldn’t be startedâ€, then your WiFi driver is outdated. Update necessary drivers, running Windows Update or downloading the latest version from official website.
4. Share the Wi-Fi connection:
o Go to “Open Network and Sharing Center†by right-clicking your WiFi icon from the right bottom corner of your screen.
o Go to “Change adapter settingsâ€
o Right-click on the VPN connection you’ve created previously and go to “Propertiesâ€.
o Go to “Sharing†tab and check on the checkbox next to “Allow Other Network User to connect through this computer’s Internet connection†and next to “Allow other network users to control or disable the shared Internet connectionâ€. On “Home Network Connection†select the connection you’ve just created.
5. Click “OK†on the next window.
Step 2: Connect to VPN
1. Connect to (name of active vpn) server from your laptop.
2. Use the new created “name of active vpn†WiFi connection for your SPS, PSP, Xbox, Cellular Phone, Tablet or AppleTV.
Please remember, your Shared WiFi connection will be disabled every time you shut down or restart your computer so, if you want to start the network again just type in command line: netsh wlan start hostednetwork
Sana makatulong sa wlang DSL connection.
Salamat.
Here we go sundan mabuti
Step 1: Set up your laptop to be like a WiFi router.
1. Open Command Prompt
o Click the Start button.
o In the search box, type: cmd
o In the list of results, right-click “cmdâ€, and then click “Run as administratorâ€.
2. Verify if necessary drivers are installed:
o Type in Command Prompt: netsh wlan show drivers
o press “Enterâ€. If next to “Hosted Network Supported†is written “Yes†then everything is ok and you can go to next step. If it says “No†then you have to install drivers for it.
o Create a WiFi network with SSID = (name of your active vpn subscription) and password = administrator
Type in Command Prompt: netsh wlan set hostednetwork mode=allow ssid=(name of vpn) key=administrator
3. Start your Wi-Fi network:
Type in Command Prompt: netsh wlan start hostednetwork
You should receive the following result: the hosted network started
If you see the message “hosted network couldn’t be startedâ€, then your WiFi driver is outdated. Update necessary drivers, running Windows Update or downloading the latest version from official website.
4. Share the Wi-Fi connection:
o Go to “Open Network and Sharing Center†by right-clicking your WiFi icon from the right bottom corner of your screen.
o Go to “Change adapter settingsâ€
o Right-click on the VPN connection you’ve created previously and go to “Propertiesâ€.
o Go to “Sharing†tab and check on the checkbox next to “Allow Other Network User to connect through this computer’s Internet connection†and next to “Allow other network users to control or disable the shared Internet connectionâ€. On “Home Network Connection†select the connection you’ve just created.
5. Click “OK†on the next window.
Step 2: Connect to VPN
1. Connect to (name of active vpn) server from your laptop.
2. Use the new created “name of active vpn†WiFi connection for your SPS, PSP, Xbox, Cellular Phone, Tablet or AppleTV.
Please remember, your Shared WiFi connection will be disabled every time you shut down or restart your computer so, if you want to start the network again just type in command line: netsh wlan start hostednetwork
Sana makatulong sa wlang DSL connection.
Salamat.