SHW-A250S Anycall security code done by OCTOPUS in second[Reference]
SHW-A250S Security code done via read info...
Tools:
Octopus box
KH-4500 Cable
Procedure:
Run samsung octopus
select model
turn on phone then insert usb cable
setup driver if needed
tick read info, wait till done..............
Screen shoots:
Welcome to Octopus Box Samsung software version 1.3.4
-----------------------------------------------------------------------------------
To connect GT-I8150 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
To connect SHW-M240S phone you have to perform the following
steps:
1. Go to dial window.
2. Enter "*#7284#" number.
3. Set "Diag config" to "USB" value.
4. Restart phone.
5. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM148
Selected model: SHW-A250S
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM136
Port is busy
Connecting to phone on COM135
Mode: Normal
Phone model: KPRBL
Phone model is not supported
Phone connection failed
Connecting to phone on COM134
Phone connection failed
Connecting to phone on COM147
Mode: Normal
Firmware compiled date: Jan 25 2011
Firmware compiled time: 09:51:16
Firmware released date: Jan 25 2011
Firmware released time: 09:51:16
Phone IMEI: 359661-03-064149-8
Bluetooth MAC: 38:16
1:F4:32:70
User code is set up. Code: 0517
SHW-A250S Security code done via read info...
Tools:
Octopus box
KH-4500 Cable
Procedure:
Run samsung octopus
select model
turn on phone then insert usb cable
setup driver if needed
tick read info, wait till done..............
Screen shoots:
Welcome to Octopus Box Samsung software version 1.3.4
-----------------------------------------------------------------------------------
To connect GT-I8150 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
To connect SHW-M240S phone you have to perform the following
steps:
1. Go to dial window.
2. Enter "*#7284#" number.
3. Set "Diag config" to "USB" value.
4. Restart phone.
5. Press "Read Info" in Octopus Samsung software.
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM148
Selected model: SHW-A250S
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM136
Port is busy
Connecting to phone on COM135
Mode: Normal
Phone model: KPRBL
Phone model is not supported
Phone connection failed
Connecting to phone on COM134
Phone connection failed
Connecting to phone on COM147
Mode: Normal
Firmware compiled date: Jan 25 2011
Firmware compiled time: 09:51:16
Firmware released date: Jan 25 2011
Firmware released time: 09:51:16
Phone IMEI: 359661-03-064149-8
Bluetooth MAC: 38:16
User code is set up. Code: 0517