SHW-M340s Samsung Logo Only Solve via Flashing [DONE][Reference]
SHW-M340s Samsung Logo Only Solve via Flashing
Put to Download Mode
Connect Usb Cable and Install Driver if Needed
Download Firmware From Octopus Support
Add Files
Write Firmware
Done
Welcome to Octopus Box Samsung software version 1.8.7
-----------------------------------------------------------------------------------
To connect SHW-M340S phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
Selected firmware file: HOME_M340S.FD18.oct
Please switch your phone to the download mode and connect it to a
PC.
To put SHW-M340S phone into download mode you have to perform
the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing APPS section...
APPS section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing FAT section...
FAT section has been written successfully.
Firmware writing successfully completed.
Connect Usb Cable and Install Driver if Needed
Download Firmware From Octopus Support
Add Files
Write Firmware
Done
Welcome to Octopus Box Samsung software version 1.8.7
-----------------------------------------------------------------------------------
To connect SHW-M340S phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
Selected firmware file: HOME_M340S.FD18.oct
Please switch your phone to the download mode and connect it to a
PC.
To put SHW-M340S phone into download mode you have to perform
the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing APPS section...
APPS section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing FAT section...
FAT section has been written successfully.
Firmware writing successfully completed.