SII(I727) pin code and unlock done..[REFERENCE]
Una po binigay sa akin na may pin code.... try ko reset by pressing vol up, vol down and power.. reset ko pero may confirmation code pa rin....
Ito nakita ko sa You tube
[ame="http://www.youtube.com/watch?v=2gcfrRR4h2c&feature=youtube"]http://www.youtube.com/watch?v=2gcfrRR4h2c&feature=youtube[/ame]
then unlocking na using octupos
Procedure:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Uploaded with ImageShack.us
Put not accepted sim
Uploaded with ImageShack.us
Una po binigay sa akin na may pin code.... try ko reset by pressing vol up, vol down and power.. reset ko pero may confirmation code pa rin....
Ito nakita ko sa You tube
[ame="http://www.youtube.com/watch?v=2gcfrRR4h2c&feature=youtube"]http://www.youtube.com/watch?v=2gcfrRR4h2c&feature=youtube[/ame]
then unlocking na using octupos
Procedure:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "USB" radio button to "Modem" value.
8. Close window.
9. Go to dial window.
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Uploaded with ImageShack.us
Put not accepted sim
Uploaded with ImageShack.us