Sm-g530h/ds cannot do normal boot. Odin mode
Flash with this firmware g530hdxs2apg1_g530holb2aoe1_xtc (downloaded from sammobile) using z3x put file in pda
After flashing go to recovery mode – wipe cache partition then wipe data/factory reset
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G530H
Software version: 29.2
Unpacking file... oK
File analysis... OK
Total file size: 0x45F2BA10 (1119 Mb)
Searching USB Flash interface... COM13 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending hyp.mbn... OK
Sending NON-HLOS.bin... OK
Sending sec.dat... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending modem.bin... OK
Sending cache.img.ext4... OK
Sending hidden.img.ext4... OK
Flashing done (time - 00:03:49)
Done with Samsung Tool PRO v.29.2
Flash with this firmware g530hdxs2apg1_g530holb2aoe1_xtc (downloaded from sammobile) using z3x put file in pda
After flashing go to recovery mode – wipe cache partition then wipe data/factory reset
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G530H
Software version: 29.2
Unpacking file... oK
File analysis... OK
Total file size: 0x45F2BA10 (1119 Mb)
Searching USB Flash interface... COM13 detected
Setup connection... OK
Reading PIT from phone... OK
Sending aboot.mbn... OK
Sending sbl1.mbn... OK
Sending rpm.mbn... OK
Sending tz.mbn... OK
Sending hyp.mbn... OK
Sending NON-HLOS.bin... OK
Sending sec.dat... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img.ext4... OK
Sending modem.bin... OK
Sending cache.img.ext4... OK
Sending hidden.img.ext4... OK
Flashing done (time - 00:03:49)
Done with Samsung Tool PRO v.29.2