dl nalang po sa support
pero kausapin muna c tumer baka ma dead ang unit....kahit na success sa flashing
pero ung akin twice na di pa naman ako naka dead
logs
Welcome to Octoplus/Octopus Box Samsung software version 2.4.7
Selected firmware file: sm-j100f_xxu0aoa7_ojv0aoa7.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J100F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+''Home" keys.
Found phone on
Firmware write started.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing LOKE1ST section...
LOKE1ST section has been written successfully.
Writing LOKE2ND section...
LOKE2ND section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing DTimPrimary section...
DTimPrimary section has been written successfully.
Writing DTimRecovery section...
DTimRecovery section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing SSTD section...
SSTD section has been written successfully.
Writing NVM section...
NVM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing PIT section...
PIT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.7 Software version.
https://www.facebook.com/messages/t/angelopinos
pero kausapin muna c tumer baka ma dead ang unit....kahit na success sa flashing
pero ung akin twice na di pa naman ako naka dead
logs
Welcome to Octoplus/Octopus Box Samsung software version 2.4.7
Selected firmware file: sm-j100f_xxu0aoa7_ojv0aoa7.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-J100F into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+''Home" keys.
Found phone on
Firmware write started.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing LOKE1ST section...
LOKE1ST section has been written successfully.
Writing LOKE2ND section...
LOKE2ND section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing DTimPrimary section...
DTimPrimary section has been written successfully.
Writing DTimRecovery section...
DTimRecovery section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing SSTD section...
SSTD section has been written successfully.
Writing NVM section...
NVM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing PIT section...
PIT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.7 Software version.
https://www.facebook.com/messages/t/angelopinos