bali ito ginawa ko
on oem muna
usb debugged
*#0808#
then
root ko ung phone
https://download.chainfire.eu/1108/...Seandroid+Enforcing+Without+Deleting+DataThis
then
patch certficate
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Patch Certificate
Selected model: SM-J710GN
Software version: 29.6
Waiting ADB device... OK
Reading phone info...
Model: SM-J710GN
Android version: 6.0.1
Product code:
Phone version:
PDA version: J710GNDXU2APL1
CSC version: J710GNOLB2APL1
CSC country code: PHILIPPINES
CSC sales code: XTC
HW version:
Phone SN: RF8H930T4DY
Chip name: EXYNOS7870
Modem board:
Security patch: 2016-09-01
RF cal date:
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.29.6
on oem muna
usb debugged
*#0808#
then
root ko ung phone
https://download.chainfire.eu/1108/...Seandroid+Enforcing+Without+Deleting+DataThis
then
patch certficate
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Repair DRK (Use it if you have DRK damaged (phone stuck on boot)):
1. Power on the phone in download mode (turn off phone, hold vol.down + Camera + Power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Repair DRK' button.
Operation: Patch Certificate
Selected model: SM-J710GN
Software version: 29.6
Waiting ADB device... OK
Reading phone info...
Model: SM-J710GN
Android version: 6.0.1
Product code:
Phone version:
PDA version: J710GNDXU2APL1
CSC version: J710GNOLB2APL1
CSC country code: PHILIPPINES
CSC sales code: XTC
HW version:
Phone SN: RF8H930T4DY
Chip name: EXYNOS7870
Modem board:
Security patch: 2016-09-01
RF cal date:
IMEI:
Checking Super user right... true
Reading NV data... OK
Checking NV data... OK
Reading data... OK
Detecting MODEM... OK
Reading MODEM... OK
Calculating... OK
Writing zTool... OK
Initialization zTool... OK
Rebooting phone... OK
Patching CERT check... done
Done with Samsung Tool PRO v.29.6
Last edited by a moderator: