SPH-M7200 ANYCALL need firmware to unlock ...[Reference]

[BLIND]

SPH-M7200 ANYCALL need firmware to unlock ...[Reference]

lease Wait Enter Test Mode ...
Enter Test Mode OK!
PDA SW Ver: M7200.DD13.0100
CSC Ver: M7200.DD13.0100
Phone SW Ver: M72.05
Firmware data not in DB. Please Wait Searching ...
Platform: [ Window Mobile ]
Phone Status:
Flash R/W: ON
Factory Mode: ON
-----------------------------------------------------------------------------
USB Mode Factory Mode:
Enter *#9090# And Choise USB Diag
*#7284# and choose Modem -> USB Diag
Select Diagnostic Serial Port Do Factory Mode.
-----------------------------------------------------------------------------
Flash Mode:
Port Set to USB. Press Write Button then insert USB cable.
-----------------------------------------------------------------------------
Command Respond Error !
Total Time: 29.43 s