share q lng po Starmobile play spark dinala po sakin matagal n pero nagyun q lng popost hang logo lang sya try q hr tulala parin kaya proceed q n flashing nag hanap aq sa tahanan ntin at may nakita aq kaya flash q n ang unit ang problema d q sya maflash kac mag automatic punta sya sa charging kaya hanap aq iba procedure sa ating tahanan pero ganun parin kaya hanap aq kay pareng google at may nakita aq complete procedure para ma flash q sya eto po!!!!!
Open SPRD NPI USB Driver > ProductionLine Version >Choose "amd64" if you'reusing 64 bits * choose x86 if you're using 32bits (After this steps install the driver thatcompatible in your PC)
*Open Upgrade Download (You can locate itin the SPRD Upgrade Tool Folder)
*After you open Upgrade Download, ClickLOAD PACKET*Then find the extracted folder of Play spark and click the pac file (Wait fora few seconds until the pac file will load)
*After the pac file will load, click the STARTDOWNLOADING (Parang Arrow)*REMOVE your battery and insert it back
*Hold Vol + and Vol - together, then connectthe USB Cable into the PC.
*If you can see "IN PROGRESS" in theUpgrade Download Tool, you can release theVol + & -*It will flash and just wait for a few minutes(It takes 3 - 5 minutes, so be patience)
*When the flashing is "PASSED" It meansyou made it
*Remove your unit in PC and ManuallyReboot your device
.*Wait 5-10 minutes to boot your device. (1sttime boot, matagal talaga pero 2nd time andso on hindi na)*Then if you're in SYSTEM now,
NPIUSBDriver:
https://mega.nz/#!3ltHiCaR!qdsQ3gtW2K5cb76Jr0BytoVRDGHdjmwHbHbVaHZg9sQAFTER
firmware: http://www.needrom.com/download/starmobile-play-spark/
thankz!!!!!!!!
Open SPRD NPI USB Driver > ProductionLine Version >Choose "amd64" if you'reusing 64 bits * choose x86 if you're using 32bits (After this steps install the driver thatcompatible in your PC)
*Open Upgrade Download (You can locate itin the SPRD Upgrade Tool Folder)
*After you open Upgrade Download, ClickLOAD PACKET*Then find the extracted folder of Play spark and click the pac file (Wait fora few seconds until the pac file will load)
*After the pac file will load, click the STARTDOWNLOADING (Parang Arrow)*REMOVE your battery and insert it back
*Hold Vol + and Vol - together, then connectthe USB Cable into the PC.
*If you can see "IN PROGRESS" in theUpgrade Download Tool, you can release theVol + & -*It will flash and just wait for a few minutes(It takes 3 - 5 minutes, so be patience)
*When the flashing is "PASSED" It meansyou made it
*Remove your unit in PC and ManuallyReboot your device.*Wait 5-10 minutes to boot your device. (1sttime boot, matagal talaga pero 2nd time andso on hindi na)*Then if you're in SYSTEM now,
NPIUSBDriver:
https://mega.nz/#!3ltHiCaR!qdsQ3gtW2K5cb76Jr0BytoVRDGHdjmwHbHbVaHZg9sQAFTER
firmware: http://www.needrom.com/download/starmobile-play-spark/
thankz!!!!!!!!
