Successful Test Reports by FULLFLASH featuring NCK BOX

[FullFlash2014]

Successful Test Reports by FULLFLASH featuring NCK BOX

mga unit na success sa flash kahit hindi same ang model at brand

sana gawing STUCK ITO THANKS



MyPhone Agua Rio Lite HANG DONE


Flash files count is :12
Action : Firmware update.
Selected China phones: Discovery II Mini(MT6582)
Exe version: NCKBox AndroidMTK 1.8.5.9
Scenario: Safe Flash
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (29Gb+8192Mb) SAMSUNG 0x4b355530304d
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004B355530304D02339084A511A1
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9420000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...

 

[FullFlash2014]

LENOVO A680 HANG DONE


Scenario: Full Flash Skip Preloader
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01

 

[FullFlash2014]

Lenovo a516 hang on logo done


Action : Boot Info.
Selected China phones:Bitel B8405(MT6572)
Exe version: NCKBox AndroidMTK 1.8.5.9
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004E355530304D02BD867465903F
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9420000
IMEI marker was found in nvram
IMEI[1] from NVRAM: 863981029828651
IMEI[2] from NVRAM: 863981029831150
Partition table saved to: Android_MTK\partition_tables\


TIP LANG /PANSININ CPU NUMBER NG MGA UNIT DAPAT TUGMA SA MODEL NA SESELECT NINYO
SA NCK BOX

 

[FullFlash2014]

BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 1501004E355530304D02BD867465903F
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9420000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
PRELOAD checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.


NOTE ULIT

YUNG MGA SIRA ANG IMEI PAG SA NCK MO FLASH SAFE YAN HINDI NASISIRA

NAGAGAWA PA KAMO hehehehehe))

 

[jeff_valencia]

ok n ok ah..mgkano po ba nckbox?idea lang po..salamat

 

[FullFlash2014]

KATA F2



Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.5.9
Selected phone: Discovery II Mini(MT6582)
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x4b3758564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B3758564D4201659ECAD59155
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000
Block Size: 512
IMEI marker was found in nvram
IMEI[1] from NVRAM: 869413001355226
IMEI[2] from NVRAM: 869413001355234
Reading security, wait...
SIM[1]:
Block1(N): locked (remain:5) Code : 12655633
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.

 

[FullFlash2014]

ALCATEL 5020A HANG RESTART
DONE FLASH





Flash files count is :19
Action : Firmware update.
Selected Alcatel: OT-5020
Exe version: NCKBox AndroidMTK 1.8.5.9
Scenario: Full Flash
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6575_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) HYNIX 0x2058494e5948
EMMC FW VERSION: 16:00:00:00:00:00:00:00
EMMC CID: 90014A2058494E594816A1C74E77109B
EMMC UA SIZE: 0xe7000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe7600000
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x3764c000 - LEN: 0x13900000
FORMAT EMMC FLASH : BEGIN: 0x4af4c000 - LEN: 0x986b4000
Send preloader...
Download firmware to flash now...

MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
EBR2 checksum is executing ...
CUSTPACK checksum is executing ...
EBR3 checksum is executing ...
MOBILE_INFO checksum is executing ...
EBR4 checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.

 

[FullFlash2014]

LENOVO A5000 RESTART AND HANG

FLASH DONE SAFE AND EASY

Flash files count is :13
Action : Firmware update.
Selected Lenovo: Lenovo A390
Exe version: NCKBox AndroidMTK 1.8.5.9
Scenario: Safe Flash
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x513758534142
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100513758534142018C98ECA652AD
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...

https://docs.google.com/uc?id=0BzrH227LBXgrU0tEVGdDdVFLVEU&export=download

 

[FullFlash2014]

hang on logo
DONE

Flash files count is :16
Action : Firmware update.
Selected Alcatel: OT-5038A
Exe version: NCKBox AndroidMTK 1.8.5.9
Scenario: Full Flash
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A4834473164040501A1F7B161BD
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x1900000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x2300000 - LEN: 0xa00000
FORMAT EMMC FLASH : BEGIN: 0x55380000 - LEN: 0xc800000
FORMAT EMMC FLASH : BEGIN: 0x61b80000 - LEN: 0x84080000
Send preloader...
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
EBR2 checksum is executing ...
CUSTPACK checksum is executing ...
MOBILE_INFO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.

 

[FullFlash2014]

Flash files count is :9
Action : Firmware update.
Selected Samsung Clone: Note 3 Clone(MT6572)
Exe version: NCKBox AndroidMTK 1.8.5.9
Scenario: Safe Flash
Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) MICRON 0x503058585858
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: FE014E50305858585810B6527F0C2187
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9300000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
Wait untill phone will start charging.
All done.

 

[FullFlash2014]

Cloudfone Excite 400dx

Detected(7) : PreLoader USB VCOM Port (COM7)
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[9] Android Gadget VCOM Driver (COM9)
USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V4.P11
HW_VER : HEXING72_WET_JB3_HSPA_HW
Phone imei[1] : 357835050114691
Phone imei[2] : 357835050216694
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
All done.

 

[FullFlash2014]

Acer z500

SIMPLY FLASH BY NCK BOX

http://www.mediafire.com/download/d832j67liytb73y/Acer_Z500+dual+sim+by+***********.rar


BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (28Gb+8192Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 58:00:00:00:00:00:00:00
EMMC CID: 7001004D4D4330344758EFE1C1927109
EMMC UA SIZE: 0xe6800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe6c20000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
ANDROID checksum is executing ...
CACHE checksum is executing ...
USRDATA checksum is executing ...
Wait untill phone will start charging.
All done.

 

[FullFlash2014]

Myphone Agua rio lite


Myphone Agua rio lite

ayaw sa sp flasher safe and done imei ok din ayus

Download mode: With Battery
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404050AA17A1431C3
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Download firmware to flash now...
MBR checksum is executing ...
EBR1 checksum is executing ...
UBOOT checksum is executing ...
BOOTIMG checksum is executing ...
RECOVERY checksum is executing ...
SEC_RO checksum is executing ...
LOGO checksum is executing ...
EBR2 checksum is executing ...
ANDROID checksum is executing ...
Wait untill phone will start charging.
All done.

 

[FullFlash2014]

0+ GRANDE
FIRST SA LAHAT NG FIRST


DIRECT UNLOCK

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.5.9
Selected phone: S5 I9600(MT6582)
Scanning for presents meta ports...
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Phone must be off with battery inside.
Please insert USB cable now...
Detected(7) : PreLoader USB VCOM Port (COM7)
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
Meta ports not detected, starting brom stage.
Phone must be off with battery inside.
Please insert USB cable now...
META Port Detected[7] PreLoader USB VCOM Port (COM7)
USB\VID_0E8D&PID_2000\6&230D7757&0&1
Detected(7) : PreLoader USB VCOM Port (COM7)
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
Start sync target, waiting responce.....
Error open meta port[COM7].
Check drivers, phone battery if charged!
Try again.
All done.
META Port Detected[9] MediaTek USB VCOM (Android) (COM9)
USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6582, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V35
HW_VER : MAGCOMM82_CWET_KK_HSPA_HW
Phone imei[1] : 353774058426506
Phone imei[2] : 353774058426514
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

 

[FullFlash2014]

0+ ultra

Brand : Oplus
ProdName : O+_Ultra
ProdModel : O+ Ultra
Device : O+_Ultra
AndroidVer: 5.0
MTKxCPU : MT6582
MTKxPRJ : Oplus_Ultra_Android_V8_0_9


alis virus done

first yan sa lahat ng first

back nasa baol kona

 

[FullFlash2014]

OPPO R831K error sa lahat ng flasher

done sa NCK BOX

 

[FullFlash2014]

lenovo tab 2 a7-30hc

READ CODES FIRST SA LAHAT NG FIRST


Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.5.9
Selected phone: Lenovo TAB A2107A
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Phone must be off with battery inside.
Please insert USB cable now...
Detected(7) : PreLoader USB VCOM Port (COM7)
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[9] MediaTek USB VCOM (Android) (COM9)
USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&0&0002
Start sync target, waiting responce.....
BaseBand CPU : MT6582, E01
SW_VER : A7-30HV.V34
HW_VER : HUAQIN82_TB_B2D_KK_HSPA_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 865770024253876
Simlock Info : Sim [1]
Block1[N] :Locked [remain:9] Code : 66769537
Block2[NS] :Unlocked Code: 56781234
Block3[SP] :Unlocked Code: 1122
Block4[C] :Unlocked Code: 3344
Block5[SIM]:Unlocked Code: 5566
**************************************
All done.

 

[sniperwolf]

boss fullflash pwede po ba makahingi ng firmware na ginamit mo dito sa R831k.... salamat po...

 

[FullFlash2014]

boss fullflash pwede po ba makahingi ng firmware na ginamit mo dito sa R831k.... salamat po...

http://www.4shared.com/rar/BD8xvJqLba/OPPO_R831K_BY_IMAM_MEGA_CELL_S.html

 

[FullFlash2014]

Alcatel one touch 6033m

ALCATEL ONE TOUCH 6033M


SUPPOT KAHIT HINDI SUPPORTED

Curent Platform: MT6575
Phone must be off with battery inside.
Please insert USB cable now...
Detected(7) : PreLoader USB VCOM Port (COM7)
Starting META mode, wait...
Restarting, wait....
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
META Port Detected[9] MediaTek USB VCOM (Android) (COM9)
USB\VID_0BB4&PID_0005&MI_02\7&1F2F085E&0&0002
SP_META_BOOT
Starting META using port[COM9], wait...
BaseBand CPU : MT6577
MODEM SW Version : MAUI.11AMDW1222SP.V15.F5.P11.T1
MODEM HW Version : JRDSH77_CU_JB_HW
IMEI[1] : 013489000329375
IMEI[2] : 000000000000000
BRAND: TCT
MODEL: ALCATEL ONE TOUCH 6033M
NAME: DiabloHD
VERSION: 4.1.1
All done.

HANG ON LOGO DONE :-h:-h:-h:-h

 

[FullFlash2014]

FIRST SA LAHAT

DUMP FROM WORKING PHONE

DTC DT6[P] MTK 6572

0-By CPU_MT6572_NAND_12_21_2015_14_29_10

 

[FullFlash2014]

wala pa sa lahat ng wala

new from smartPH

alcatel 1011D input password done

Com port ok : COM7
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM7)
BaseBand CPU : MT6250
SW_VER : MAUI.11B.W11.32.SP.V12.F8
HW_VER : JRDHZ50M_11B_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 865271020335346
Phone imei[2] : 865271020335353
User code(Active) : 3885145
Phone model: OT-1011D
SIMLOCK INFO[1]
SECRO NAME: XW81PBF0
SIMLOCK STATUS: PHONE IS UNLOCKED
NCK: 0701188618 Counter[10/10]
NSCK: 3652284172 Counter[10/10]
SPCK: 1824390543 Counter[10/10]
SIM: 2006611608
CORPORATE: 3419951435
SIMLOCK END

META END OK.
All done.

 

[FullFlash2014]

Sm-g531h/ds bypass google account

SM-G531H/DS BYPASS GOOGLE ACCOUNT


Detecting phone, wait..
Detected: Modem (COM16)
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Done
Chipset: SPRD8735
Data Found, processing...
Resetting FRP, wait..
FRP OFF... Done
Now you can wipe phone to remove remaining data...
Restarting Phone
Restart Ok
All Done
Done.

 

[FullFlash2014]

alcatel 8000a permanently locked

Detected : ALCATEL HS-USB Android DIAG 9018 (COM7)
IMEI: 013488001989484000
VERSION : 8X25-SSNSKOLYM-2035
Unsupported firmware, please upgrade unit.
Start reset phone...
Reset done, if phone not restart, restart manually.
All done.


http://www.4shared.com/get/qC67t-mxba/Driver_Alcatel_8000a.html

 

[smile06]

LG X145 HANG IN LOGO SUCCESSFULY FULL FLASH


Flash files count is :12
Action : Firmware update.
Selected 0-By CPU: MT6572_EMMC
Exe version: NCKBox AndroidMTK 1.8.6.4
Scenario: Full Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MTK USB Port (COM36)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM54)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x3f940000 - LEN: 0xe200000
FORMAT EMMC FLASH : BEGIN: 0x4db40000 - LEN: 0x9a840000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.

 

[FullFlash2014]

Sm-j500h/ds

BYPASS SAMSUNG ACCOUNT DONE

Detecting phone, wait..
Detected: Modem (COM7)
Bypassing data, wait....
Bypass ok.
Reading Data,wait....
Done
Chipset: MSM8916
Data Found, processing...
Resetting FRP, wait..
[08]Error reading,aborting
Restarting Phone
Restart Ok
All Done
Done.

ERROR YAN TAPOS HANG UNIT
THEN FLASH SA NORMAL ANG UNIT

TAPOS NA

 

[alexan]

ang tindi mo talaga master full flash.. box kasama ng utak.. grats po.. kainggit ka boss

 

[FullFlash2014]

ang tindi mo talaga master full flash.. box kasama ng utak.. grats po.. kainggit ka boss

napatawa mo ko
good morning))))

 

[FullFlash2014]

REMOVE MALWARE
DONE


Exe Version: NCK BOX v6.2.8
Phone must be on, USB debugging must be enabled.
If Phone ask for Allow Usb Debugging, allow.
Searching for Device...
Device Found
Model: Telpad QS
Version: 4.1.2
Hardware: rk30board
Baseband: Unknown
Basedband Not Found!
Try Read Info Again After Boot Finished!
Possibly Device May Not Have SIM Function!
SIM Card: NOT_READY
CPU: armeabi-v7a
Type: GSM
IMEI(1): null
Checking Root Access...
If Phone ask for su, allow.
root: uid=0(root) gid=0(root)
Root: Rooted
Loading Detection Data...
OK
Scanning for Malware/Suspicious Files...
OK
Files Found: 17
Operation Finished.

 

[FullFlash2014]

truconnect flow 3g

truconnect flow 3g unlocking

matigas ang unlocking nito

META DIRECT UNLOCK DONE

Selected model: P1000 TAB(MT6572)
Action: Unlock
Scanning for presents meta ports...
Meta ports not detected, starting brom stage.
Curent Platform: MT6572
Phone must be off with battery inside.
Please insert USB cable now...
[10]Detected: MediaTek PreLoader USB VCOM (Android) (COM10)
\\?\usb#vid_0e8d&pid_2000#6&1629b2fd&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
USB\VID_0E8D&PID_2007\6&1629B2FD&0&3
Start sync target, waiting responce.....
BaseBand CPU : MT6572,S01
APP_VER: ALPS.KK1.MP7.V1
BaseBand CPU : MT6572, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V43.P1
HW_VER : RATECH72_CWET_KK_HSPA_HW
Phone imei[1] : 354754073398988
Phone imei[2] : 354754073398988
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
All done.

 

[FullFlash2014]

doro phone easy 623

WORLD FIRST

UNLOCK BY ME


doro phone easy 623



USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM35
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM35)
BaseBand CPU : MT6276
SW_VER : SHUTTLE-S21B_DORO623_L17EN_202_140414
HW_VER : CKT76_11A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 353464060215432
Phone imei[2] : 353464060215432
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1(N) : Unlocked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C) : Unlocked
META END OK.
All done.

MASKI SAANG NET WALA KAYO MAKITA
SUCCESS UNLOCK SA UNIT NAYAN

~X(~X(~X(

 

[FullFlash2014]

8000a permanent LOCK

use this saka reset mo unit


http://www.4shared.com/postDownload/PZTOsMx-ba/NCK_BOX_Setup_v53.html


Detected : ALCATEL HS-USB Android DIAG 9018 (COM131)
IMEI: 013488002054528000
VERSION : 8X25-SSNSKOLYM-2035
Unsupported firmware, please upgrade unit.
Start reset phone...
Reset done, if phone not restart, restart manually.
All done.

 

[FullFlash2014]

wrong post..:x:x:x:x:x

 

[FullFlash2014]

Htc desire 310 d310u

HTC DESIRE 310 D310U


Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.7.2
Selected model: HTC 310
Action: Unlock
Scanning for presents meta ports...
Detected(18) : Gadget CDC VCOM Driver (COM18)
Skipping brom stage, meta port found.
Start sync target, waiting responce.....
BaseBand CPU : MT6582,S01
APP_VER: ALPS.JB5.MP.V1.23
BaseBand CPU : MT6582, E01
SW_VER : MOLY.WR8.W1315.MD.WG.MP.V19.F4.P4
HW_VER : CCI82_WET_LX83_JB5_HSPA_HW
Phone imei[1] : 351913060229282
Phone imei[2] : 351913060229282
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.

 

[FullFlash2014]

doro phoneEasy 618

doro phoneEasy 618

puwede pala

ayus...


Connect phone in boot mode ...
USB\VID_0E8D&PID_0003&REV_0100
Com port ok : COM63
Phone detected...Please wait
Conected ok with target ...
Reopen comport(COM63)
BaseBand CPU : MT6276
SW_VER : APPLE-S01A_DORO618_L3EN_201_121106
HW_VER : CKT76_11A_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : 352009050966055
Phone imei[2] : 352009050966055
UNLOCK SIM[1]:
Unlock ok sim[1]
SIMLOCK INFO[1]:
Block1[N]: Unlocked
Block2[NS]: Unlocked
Block3[SP] Unlocked
Block4[C]: Unlocked
META END OK.
All done.

 

[ron316]

galing nck box user din ako. lakeng tulong tlga ni nck

 

[FullFlash2014]

galing nck box user din ako. lakeng tulong tlga ni nck

Pag di alam gamitin ang BOX wala din sir hehehe

LABAS KO IBANG NAGAGAWA NG BOX NA ITO

NA HINDI ALAM NG IBA..

 

[FullFlash2014]

ZTE E8QP_ZTE_PAD unlock done

ZTE E8QP_ZTE_PAD

FIRST SA LAHAT

Exe version: NCKBox AndroidMTK 1.8.7.3
Selected model: MT6735
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM6)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (115Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 43:00:00:00:00:00:00:00
EMMC CID: 8801034E436172 : 000000000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39d820000 [14.461 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM17)
IMEI[1]: 868711020073386
IMEI[2]: 866918701639268
Reading security, wait...
Block1(N): Locked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Block1(N): Locked (remain:100) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
ALGO[2]
Unlock finished.
Wait untill phone will start charging.
All done.

MORE INFO FROM PHONE
BACKUP DUMP DONE.

Brand : ZTE E8QP_ZTE_PAD_EN.V2016.02
ProdName : E8QP
ProdModel : E8QP
Device : E8QP
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : ALPS.L1.MP3.V1_ELINK8735M.3TB.L_P30

> Reading Device Info... done.
------------------------------------------------------

---------------
- Model : E8QP
- Name : E8QP
- Build ID : LMY47D
- Version : 5.1 > LOLLIPOP
- Kernel Version : 3.10.
- Board : E8QP
- MTK Platform : MT6735
- Display ID : E8QP_ZTE_PAD_EN.V2016.02
- Baseband : MOLY.LR9.W1444.MD.LWTG.MP.V8.P7,

2016/01/21 18:33
------------------------------------------------------

---------------
- Processor : ARMv7 Processor rev 4 (v7l)
- Hardware : MT8735M
------------------------------------------------------

---------------
- Serial No. : 0123456789ABCDEF
------------------------------------------------------

---------------
- UP TIME: 00:07:29, IDLE TIME: 00:07:52, SLEEP TIME:

00:00:00
------------------------------------------------------

---------------
> All done.

 

[FullFlash2014]

mb860 unlock done..

Phone must be on, USB debugging must be enabled.
If Phone ask for SU, allow.
Found Device, reading info..
Brand: MOTO
Model: MB860
Build ID: 4.5.1A-129_OLY-145
Platform ID: tegra
OS version: 2.3.6
Build version: 4.5.1A-129_OLY-145
SU binary present.
Reading data wait...
Build ID : 4.5.1A-129_OLY-145
Version : 2.3.6
Product Name : olyatt
Manufacturer : motorola

Phone must be on, USB debugging must be enabled.
If Phone ask for SU, allow.
Found Device, reading info..
Brand: MOTO
Model: MB860
Build ID: 4.5.1A-129_OLY-145
Platform ID: tegra
OS version: 2.3.6
Build version: 4.5.1A-129_OLY-145
SU binary present.
Starting unlock, wait...
Unlock Done.

 

[FullFlash2014]

new from smart

unlock using codes only

first sa lahat DONE

5051e-2BSAPH1
352277073873273
New: 9543292929643526

 

[FullFlash2014]

Dtc gt6 lolly

PATTERN DONE

WORLD FIRST






Detected: SPRD U2S Diag (COM7)
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Reading extended info, wait...
FileSystem: EMMC
Manufacturer: WITTIS
Hardware: SP7731GEA_V1.0.0
Platform: sc8830
Board: s7336_wvga
Build Id: DTC_GT6L
Model: DTC_GT6L
Android Release: 5.1
Android Version: DTC.GT6L.V10.20151209
IMEI 1: 356293070102265
IMEI 2: 356293070102273
[CUST]Simlock Status: UNLOCKED
[USER]Simlock Status: UNLOCKED
Simlock Type: 0
Formating userdata, wait...
Formating cache, wait...
[misc]Format OK.
Total Time: 00:00:32
Done.

 

[FullFlash2014]

flare j1 mini FRP lock

flare j1 mini FRP lock


FRP REMOVE IN 3 SECONDS ONLY


EXE: NckBox Spreadtrum Module 0.4
SELECTED: SC7720EA_EMMC 5.x
ACTION: Reset FRP
Start Detect phone.
Phone must be off with battery inside.
Long press "VOL -" key while inserting usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM7)
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
Loader OK: Spreadtrum Boot Block version 1.1
Changing bautrate OK.
Send Second Loader.
Reading extended info, wait...
FileSystem: EMMC
Manufacturer: Cherry
Hardware: SP7731C_V1.0.0
Platform: sc8830
Board: sp7731ceb
Build Id: LMY47D
Model: Flare_J1_mini
Android Release: 5.1
Android Version: Cherry_Flare_J1_mini_v11_160521
IMEI 1: 351661070087824
IMEI 2: 351661070587971
[USER]Simlock Status: UNLOCKED
Simlock Type: 0
Removing frp, wait...
Format OK.
Total Time: 00:00:23
Done.

 

[bojs]

fantastic...



br,
bojs

 

[JULAY20]

nice reference boss

 

[FullFlash2014]

Alcatel 8000A permanent lock

Alcatel 8000A permanent lock DONE.

install driver
https://www.4shared.com/rar/yN2jHIbNca/installdriver.html

Detected : ALCATEL HS-USB Android DIAG 9018 (COM30)
IMEI: 013488002038000000
VERSION : 8X25-SSNSKOLYM-203

1, open nck main module select palm phone(install driver if needed)
2,select port(alcatel hs-usb diag 9018)
3,click reset block phone(to reset pin lock to 10