thrill hd [SUPER KUNAT]

[FullFlash2014]

thrill hd cloudfone

flash using this

Cloudfone Thrill HD MT6580 By Sonny

MT6580__CloudFone__Thrill_HD__ThrillHD__6.0__ALPS.W10.24.p0

MT6580__CloudFone__Thrill_HD__ full repair

hang parin any idea?

 

[acetech05]

up up natin tm fullfalsh.

 

[FullFlash2014]

emmc: (58gb+8192mb) sandisk 0x445331303038
emmc fw version: 30:30:36:30:33:33:00:00
emmc cid: 45010044533130 : 000000000000000000
emmc ua size: 0x1d2000000
boot style: Emmc boot
full length: 0x1d2c00000 [7.293 gb]
preloader sec version: 2
status: Usb_high_speed
detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : Da usb vcom port (com19)
warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash emmc algo start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

wow super kunt talga }-)}-)}-)}-)

 

[FullFlash2014]

This phone have FRP partition.
Build ID: MRA58K
Display ID: ThrillHD_FS20160122_V04
Version: 6.0
Build Date: Fri Jan 29 10:13:42 CST 2016
Build Date: 1454033622
Model: Thrill HD
Brand: CloudFone
Device: ThrillHD
Manufacturer: CloudFone
Mediatek Version Release: ALPS.W10.24.p0
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
IMEI[1]: 356276075195335
IMEI[2]: 356276075595831
Wait untill phone will start charging.
All done.

ANO KAYA KULANG

 

[junmags]

boss try mo convert ng mga files mbr,ebr1, or sysmtem at userdata,kc naka incounter ako ng tablit m706 v5.2 admit ilang ulit kng e flash hung paren kahit nag done,pinag aaralan ko ang mga files or e edit buti at nag ok xa boss admit ang unang labas,pagkatapos samasung ang logo pero try mo lng boss e edit yan po ang comment ko

 

[FullFlash2014]

dapat after flash
papakita ang charging bar nito
pero charge lang nag papakita after flash

try ko rin babad baka matagal lang same hang parin..

 

[junmags]

or baka boss switch ang sera kc nag chagre man after flash or baka wlang linya ang switch try mo check boss
ay ok pla switch no akala ko hnd,convert mo boss mga files try mo bsta same lng number mtk

 

[junmags]

kng ayaw paren boss baka ic nayan try mo kya heat ang ic sabihan c 2mer 50 50 dead or alive