Torque Droidz Motion firmware here

[gemma]

Torque Droidz Motion TESTED BY me TORQUE DROIDZ MOTION tested by me....

Please insert USB cable now...
Detected : MTK USB Port (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6589_S01
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 7001004D4D4330 : 000000000000000000
EMMC UA SIZE: 0xe2c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe3020000 [3.547 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM55)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x2d180000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x34f80000 - LEN: 0x40000000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.

no pass

 

[Bayotnapogi_18]

Salamat Sir

 

[ecosis]

tnx po sa fw,,,,

 

[meljohn]

tnx master sa firmware mo..tested by me..ok na ok kahit imei buo

 

[tjjade11]

thnks po! tested

 

[Jastech]

thanks po sa share..:-bd

 

[markpsycho]

tested po salamat sa fw

Please insert USB cable now...
Detected : MTK USB Port (COM21)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6589_S01
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x4d4d43303447
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 7001004D4D4330 : 000000000000000000
EMMC UA SIZE: 0xe2c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe3020000 [3.547 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM55)
Flash EMMC Algo Start.
Starting flash.
FORMAT EMMC FLASH : BEGIN: 0x2d180000 - LEN: 0x7e00000
FORMAT EMMC FLASH : BEGIN: 0x34f80000 - LEN: 0x40000000
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.