- Joined
- Nov 11, 2020
- Messages
- 8
Vivo V11PRO Auto Recovery & Touch not working 
Good day sa lahat , may tanggap ako ngayun Vivo v11 pro auto Recovery .
Sabi ni tumer bigla nalang daw nag auto Recovery .
Action Taken
Baklas unit at check ko volume angat at power On unit pero ganun parin auto recovery at ayaw mag touch .
Proceed ako sa software , hanap ako tested firmware at may nakita ako .
Proceed na ako sa flashing , ang ginamit ko ay HYDRA TOOL .
Open hydra qualcomTool
Select Brand Vivo
Model V11pro
Connect Phone w/ Tespoint
wag na tanggalin battery pag nag tp
- Boot info
Select FLASHTOOL TAB
file type: Manual Select Raw/patch Xml
Raw/XML: Load (rawprogram)
Patch/XML: Load (patch0)
after load firmware click EXECUTE
Hintayin matapos ang flashing .
Pagkatapos ng flashing Power ON unit at pagtingin ko may frp kaya proceed sa FRP Remove ....
firmware link: https://www.mediafire.com/file/1ivm...4300-sdm660_split(Repairmymobile.in).rar/file
Open unit HYDRA qualcomTool
select brand & model
select factory reset protection (FRP)
select Auto
Tespoint without removing battery
after madetect click Execute & DONE
Power ON unit at successfuly removed FRP
pero my napansin ako sa itaas may nakalagay [PHONE EXCEPTION] hanap ako solusyon at may nakita ako DownLoad Tool TOOL ALL IN ONE https://www.mediafire.com/file/kj1poulj3t19loo/TOOL_ALL_IN_ONE_2.0.1.1.zip/file
first enable usb debbuging
Open tool all in one
apk uninstaller
hanapin sa baba ang ( com.vivo.daemonService ) check/click then click uninstall selected apps , after DONE restart device at tingnan kong wala na and YES successfully removed [Phone Exception]
Maraming Salamat sana makatulong
Good day sa lahat , may tanggap ako ngayun Vivo v11 pro auto Recovery .
Sabi ni tumer bigla nalang daw nag auto Recovery .
Action Taken
Baklas unit at check ko volume angat at power On unit pero ganun parin auto recovery at ayaw mag touch .
Proceed ako sa software , hanap ako tested firmware at may nakita ako .
Proceed na ako sa flashing , ang ginamit ko ay HYDRA TOOL .
Open hydra qualcomTool
Select Brand Vivo
Model V11pro
Connect Phone w/ Tespoint
wag na tanggalin battery pag nag tp
- Boot info
Select FLASHTOOL TAB
file type: Manual Select Raw/patch Xml
Raw/XML: Load (rawprogram)
Patch/XML: Load (patch0)
after load firmware click EXECUTE
Hintayin matapos ang flashing .
Pagkatapos ng flashing Power ON unit at pagtingin ko may frp kaya proceed sa FRP Remove ....
firmware link: https://www.mediafire.com/file/1ivm...4300-sdm660_split(Repairmymobile.in).rar/file
Open unit HYDRA qualcomTool
select brand & model
select factory reset protection (FRP)
select Auto
Tespoint without removing battery
after madetect click Execute & DONE
Power ON unit at successfuly removed FRP
pero my napansin ako sa itaas may nakalagay [PHONE EXCEPTION] hanap ako solusyon at may nakita ako DownLoad Tool TOOL ALL IN ONE https://www.mediafire.com/file/kj1poulj3t19loo/TOOL_ALL_IN_ONE_2.0.1.1.zip/file
first enable usb debbuging
Open tool all in one
apk uninstallerhanapin sa baba ang ( com.vivo.daemonService ) check/click then click uninstall selected apps , after DONE restart device at tingnan kong wala na and YES successfully removed [Phone Exception]
Maraming Salamat sana makatulong
Last edited by a moderator:
