Vivo y11 password done using mrt 3.53 via tp
Run mrt ver3.53(tried with ver3.55 pero laging nag disconnect)
Select vivo
Selectr model – y11
Select format(unlock)
Open phone back cover, disconnect battery connector, open the testpoint according to picture.
Phone in off mode, connect usb cable to pc then connect testpoint using twizzer, open device manager and check if port shows edl
Click start, connection is auto then release tp
Wait till operation is finished.
Run mrt ver3.53(tried with ver3.55 pero laging nag disconnect)
Select vivo
Selectr model – y11
Select format(unlock)
Open phone back cover, disconnect battery connector, open the testpoint according to picture.
Phone in off mode, connect usb cable to pc then connect testpoint using twizzer, open device manager and check if port shows edl
Click start, connection is auto then release tp
Wait till operation is finished.
- Matagal ang setup kaya hintay lang
