- Joined
- Jan 11, 2015
- Messages
- 464
Vivo y11 password & frp done using umt dongle
Need to open back cover for the testpoint
Battery connector should be disconnected
Run umt dongle qcfire v6.2
Select read & tools
Select brand = vivo
Select model = y11
Open device manager, connect testpoint using twizzer and check if phone is detected in edl mode then release twizzer
Click vivo fs/frp
Detection is auto
Wait until operation is finished.
one click operation. only click fs/frp - password & frp will be removed
Takes several minutes for the phone to boot completely. Have patience.
Need to open back cover for the testpoint
Battery connector should be disconnected
Run umt dongle qcfire v6.2
Select read & tools
Select brand = vivo
Select model = y11
Open device manager, connect testpoint using twizzer and check if phone is detected in edl mode then release twizzer
Click vivo fs/frp
Detection is auto
Wait until operation is finished.
one click operation. only click fs/frp - password & frp will be removed
Takes several minutes for the phone to boot completely. Have patience.