What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

W7 exit safe mode done...[Reference]

PhoneWar

Registered
Joined
Mar 17, 2015
Messages
876
Reaction score
3
Points
81
Location
manila
share ko lang po gawa ko w7 exit safe mode

unit: cherry mobile W7
problem: exit safe mode
tools: volcano box, main cable, rx tx cable

procedure in screen shoot:








logs:

Volcano Updated: 2013-06-10
Connecting...
Connection successful,connected state!
Version: V3.8
SN:155-981-056
Port:COM4
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Available Ports:COM1 COM4
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
RX: 3, TX: 2

23
Connecting...
Hardware version:CA01
Software version:0001
CPU TYPE:625A
Internal version:8000
Boot downloading complete!
Flash ID: 00C80060
Chip Capacity: 0x1000000(16MB)
Baud adjust...complete.
Flash reading complete!
The data has been saved in E:\Volcano\cherry mobile W7.bin, size: 16 M.
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: null
Waiting for phone's response,please press Power on/off button...
Connecting...
Hardware version:CA01
Software version:0001
CPU TYPE:625A
Internal version:8000
Boot downloading complete!
Flash ID: 00C80060
Chip Capacity: 0x1000000(16MB)
Baud adjust...complete.
Format range: Start Address: 0xE40000,Format Length :0x1C0000
>>Flash erasing complete!




change imei screenshoot:​
salamat po sa pagview​




done


 
Back
Top