REFERENCE Xiaomi Redmi 7a the system has been destroyed Done in Umt.

[froi]

STATUS

PROCEDURE AND SOLUTION

1st Disassemble muna ang phone para sa edl mode..
2nd Open Umt Qcfire,
3rd Tick read & tools
4th Tick brand and Select Xiaomi,tick model redmi 7a
6th Tick Read info para malaman ang saktong version...
7th Download Firmware Here!...
8th Extract mo using 7zip para madetect ng Umt..
9th Check Programe And Tick rawprogram0
10th Tick flash and ngiti kana..

FINISH PRODUCTS

​

 

[tony84]

salamat dito tested
V12.0.3.0.QCMCNXM flash to V11.0.4.0.QCMMIXMafter flashing global na firmware ng phone


Device : Xiaomi Redmi 7A
Operation : Read Information
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM20)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.0.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_035]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V12.0.3.0.QCMCNXM [Wed Mar 31 16:32:33 CST 2021]
Android Ver. : 10
Patch Level : 2021-03-01
USERDATA : Normal
You can use RESET LOCKS to remove Pin/Pattern/Password WITHOUT Data Loss.
Operation Finished.
QcFire Ver. 6.8

 

[Gsmhot_iron]

Operation : Flash
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM61)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00007200
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_035]...Done
Executing Loader...OK
Auth Enabled Device! You may need Mi Auth Account to service!
Skipping Auth...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 16 GB
LU Count : 3 [0x01D5A000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 7A [pine]
Brand : Xiaomi
Prod.Name : pine
Software : ZQL1533-pine-build-20190805184733, V10.2.5.0.PCMMIXM [Mon Aug 5 18:50:07 WIB 2019]
Android Ver. : 9
Patch Level : 2019-07-01
Writing [sec.dat] -> [sec] ...Done
WARNING! File vbmeta.img is missing from program.
WARNING! File vbmeta.img is missing from program.
Writing [devcfg.mbn] -> [devcfg] ...Done
Writing [devcfg.mbn] -> [devcfgbak] ...Done
WARNING! File dummy.img is missing from program.
WARNING! File dummy.img is missing from program.
Writing [sbl1.mbn] -> [sbl1] ...Done
Writing [sbl1.mbn] -> [sbl1bak] ...Done
Writing [rpm.mbn] -> [rpm] ...Done
Writing [rpm.mbn] -> [rpmbak] ...Done
Writing [cmnlib_30.mbn] -> [cmnlib] ...Done
Writing [cmnlib_30.mbn] -> [cmnlibbak] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64] ...Done
Writing [cmnlib64_30.mbn] -> [cmnlib64bak] ...Done
Writing [km4.mbn] -> [keymaster] ...Done
Writing [km4.mbn] -> [keymasterbak] ...Done
WARNING! File misc.img is missing from program.
Writing [emmc_appsboot.mbn] -> [aboot] ...Done
Writing [emmc_appsboot.mbn] -> [abootbak] ...Done
Writing [tz.mbn] -> [tz] ...Done
Writing [tz.mbn] -> [tzbak] ...Done
WARNING! File dtbo.img is missing from program.
WARNING! File dtbo.img is missing from program.
WARNING! File splash.img is missing from program.
Writing [adspso.bin] -> [dsp] ...Done
Writing [adspso.bin] -> [dspbak] ...Done
WARNING! File mdtp.img is missing from program.
WARNING! File mdtp.img is missing from program.
WARNING! File boot.img is missing from program.
WARNING! File recovery.img is missing from program.
WARNING! File cache.img is missing from program.
Writing [NON-HLOS.bin] -> [modem] ...Done
WARNING! File system.img is missing from program.
WARNING! File vendor.img is missing from program.
WARNING! File cust.img is missing from program.
WARNING! File userdata.img is missing from program.
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Set Boottable Storage Drive to 0...Done
Reading Partition Table...OK
Resetting FRP Lock......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.9

 

[Gsmhot_iron]

ganyan lang sakin master error sya