REFERENCE Xiaomi Redmi 9A [ M2006C3LG ] FRP

[maxie]

Hi


Unit: Xiaomi
Model: Redmi 9A ( M2006C3LG )
Problem: Gmail or Google account
Solution: Unlock Via Pandora box

Procedures

1. Turn off Device
2. Open pandora
3. select Redmi 9A Dandelion
4. Press and Hold Vol-up and Vol Down
5. click Erase FRP
6. Insert Cable
7. Wait until Done

Logs:

Spoiler: Logs

Selected model: Xiaomi Redmi 9A (Dandelion)
Operation: Erase FRP
Software version: 6.1
Work ID: 13821725

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM43 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM43 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xDBE6189F, 0x46C72192, 0x25F93C15, 0x5E2F7CCC
Get Chip ID... [MT6765]
Get SOC ID... [24C04579D8A7900100EEAF45FAC91E55F06F5AF66CB434B694552D8A0088BA72]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x9B010059325030333200758908B578FF
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y2P032
EMMC_ID : 0x9B010059325030333200758908B578FF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : M2006C3LG
Product Name : dandelion_eea
Product Device : dandelion
Product Board : dandelion
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Fri Jul 2 23:37:35 CST 2021
Display ID : QP1A.190711.020
Security Patch : 2021-06-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : V12.0.14.0.QCDEUXM
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%209A%20(Dandelion)/FRP_BACKUP_(2023-12-4_23-25-35)/
Writting FRP data... OK
Erase FRP done!

images