zh&k pioneer 6
nck craked
Flash files count is :9
Action : Firmware update.
Selected 0-By CPU: MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Spansion] KEM51200_NADGSBXM2C32
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 2048 SpareSize: 64 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM8)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash NAND Algo Start.
Download firmware to flash now...
Wait untill phone will start charging.
https://www.4shared.com/rar/wGTeOALGei/MT6572_NAND_ZHK_PIONEER_6__ZHK.html?cau2=403tNull&ua=WINDOWS
thanks sa original na nag post
post ko lng dito mga sir since wala akong nakitang fw na kaparehas nito dito sa group
buck up muna unit before proceed sa flash
note: pag nag blurd flash mu lng ulit ung buck up mu then flash mu ulit check lng ang android,preloader,userdata
nck craked
Flash files count is :9
Action : Firmware update.
Selected 0-By CPU: MT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 256 MB DRAM
----------------------------------------------------
NAND: (4Gb+2048Mb) [Spansion] KEM51200_NADGSBXM2C32
BOOT STYLE : NAND BOOT
Size: 0x20000000 [0.500 GB]
BlockSize: 2048 SpareSize: 64 BMT Blocks 80
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM8)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash NAND Algo Start.
Download firmware to flash now...
Wait untill phone will start charging.
https://www.4shared.com/rar/wGTeOALGei/MT6572_NAND_ZHK_PIONEER_6__ZHK.html?cau2=403tNull&ua=WINDOWS
thanks sa original na nag post
post ko lng dito mga sir since wala akong nakitang fw na kaparehas nito dito sa group
buck up muna unit before proceed sa flash
note: pag nag blurd flash mu lng ulit ung buck up mu then flash mu ulit check lng ang android,preloader,userdata