HELP ME ZTE Blade Vec Pro bootloop

[rdctel23]

unit: ZTE Blade Vec Pro
problem: when press power on reboot only (bootloop)
action taken: open ko muna, charge ko batt
power on ko ganun pa din...

boot info:

Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM65)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6592_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847326404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A48384732 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: 8655620226xxxx9
IMEI[2] from NVRAM: 8655620226xxxx2
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.

naka pag download na po ako ng firmware...... dito po...

http://antgsm.com/showthread.php?t=93967&highlight=zte+blade+vec+pro

http://antgsm.com/showthread.php?t=130607&highlight=zte+blade+vec+pro

http://antgsm.com/showthread.php?t=105966&highlight=zte+blade+vec+pro


need ko po sana password.. salamat po....