pagdating ng customer sabi nya sir bat ganto cp ko...
parehas sila....namamatay at mabubuhay...
kaya sabi ko mam, program na lang po natin mga cp nyo....
may tama cguro yan sa program nya....sabi nya ok cge
)
kaya ito ginawa ko....
labas si cyclone sa baol....
saksak sa laptop....
tapos open ko cyclone software...
tapos click ko sya sa common...
tapos select mo yung usb pag yun ang gagamitin mo, usb micro
tapos click bb5(rap, broadcom, Xgold)....
tapos ilagay ang firmware ng phone kung anong model.....dapat tamang firmware ng phone
tapos click write flash images, after that....
connect mo phone sa usb micro saksak mo laptop=))
pindotin po ng kunti yung power para magconnect)
wait nyo na lang until finish...
ito po ang logs
logs po ng 203
logs po ng 210
ito na po finish product:x
wahahahaha....napasama pa cute kung mata ah...=)))
thanks po...sana po nag enjoy kayo sa kwento ko...
i love u ant, i love u all ant colony...:-*
parehas sila....namamatay at mabubuhay...
kaya sabi ko mam, program na lang po natin mga cp nyo....
may tama cguro yan sa program nya....sabi nya ok cge
)kaya ito ginawa ko....
labas si cyclone sa baol....
saksak sa laptop....
tapos open ko cyclone software...
tapos click ko sya sa common...
tapos select mo yung usb pag yun ang gagamitin mo, usb micro
tapos click bb5(rap, broadcom, Xgold)....
tapos ilagay ang firmware ng phone kung anong model.....dapat tamang firmware ng phone
tapos click write flash images, after that....
connect mo phone sa usb micro saksak mo laptop=))
pindotin po ng kunti yung power para magconnect
)wait nyo na lang until finish...
ito po ang logs
logs po ng 203
Code:
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm832__20.26.mcusw (XGold2)...
Checking rm832__20.26.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.47_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC3012, Samsung, Size: 64MBytes
Processing "rm832__20.26.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41DBFFFF...
Flashing at 0x40280000...
Flashed 28049408 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing 343E76EC_rm832__20.26.ppm_m_a (XGold2)...
Checking 343E76EC_rm832__20.26.ppm_m_a...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m_a.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41DC0000-0x424BFFFF...
Flashing at 0x41DC0000...
Flashed 4256180 bytes OK
Processing 383EF359_rm832__20.26.image_m_a_059M7F6 (XGold2)...
Checking 383EF359_rm832__20.26.image_m_a_059M7F6...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_m_a_059M7F6.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x424C0000-0x43E1FFFF...
Flashing at 0x424C0000...
Flashed 12713984 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
[Nokia Asha 202 USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia Asha 202 USB Phonet]: Port opened OK!
MCU Version V 20.26
MCU Date 14-03-12
Product RM-832 (Nokia RM-832)
Manufacturer (c) Nokia
IMEI 351681050020470
Mastercode 710327220
IMEI Spare 3A15860105204007
IMEI SV 3315860105204007F2000000
PPM V 20.26, 14-03-12, RM-832, (c) Nokia , M_A
CNT Content: m_a_059M7F6, V 20.26, 14-03-12, RM-832, (c) Nokia
PSN 93A9440AH
Product Code 059P5Q7
Module Code 0205120
Basic Product Code 059N238
PSD 0000000000000000
LPSN 0
HW 1000
RFIC 68
LCD AUO
BT 19b5-22012
Asic 11
HW Signature 6BD3750FE4499F35
Simlock Server SIMLOCK SERVER
Simlock Key 5150200000000000
Simlock Profile 800000000003000B
Simlock Aux 000B0000
Simlock IMEI 00003516810500204700
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 51502F
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!logs po ng 210
Code:
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in FileName and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing 3642A33D_rm924__04.12.mcusw (XGold2)...
Checking 3642A33D_rm924__04.12.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.56_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC3012, Samsung, Size: 64MBytes
Processing "rm924__04.12.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4015FFFF...
Flashing at 0x40060000...
Flashed 1048576 bytes OK
Erasing 0x40280000-0x41CBFFFF...
Flashing at 0x40280000...
Flashed 27525120 bytes OK
Erasing 0x43E20000-0x43E5FFFF...
Processing 5E0B98D8_rm924__04.12.ppm_mh1 (XGold2)...
Checking 5E0B98D8_rm924__04.12.ppm_mh1...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_mh1.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41CC0000-0x422FFFFF...
Flashing at 0x41CC0000...
Flashed 4916176 bytes OK
Processing 11E52EEC_rm924__04.12.image_mh1_059R7H0 (XGold2)...
Checking 11E52EEC_rm924__04.12.image_mh1_059R7H0...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_mh1_059R7H0.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x42300000-0x43E1FFFF...
Flashing at 0x42300000...
Flashed 12713984 bytes OK
Erasing 0x43E60000-0x43F3FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
[Nokia USB Phonet]: Port opened OK!
Factory defaults OK
Reading info...
[Nokia USB Phonet]: Port opened OK!
MCU Version V 04.12
MCU Date 21-05-13
Product RM-924 (Nokia RM-924)
Manufacturer (c) Nokia
IMEI 358337052841867
Mastercode 6443673572
IMEI Spare 3A85330725488106
IMEI SV 3385330725488106F7000000
PPM V 04.12, 21-05-13, RM-924, (c) Nokia , MH1
CNT Content: mh1_059R7H0, V 04.12, 21-05-13, RM-924, (c) Nokia
PSN 215576DBH
Product Code 059R9L7
Module Code 0205470
Basic Product Code 059R080
PSD 0000000000000000
LPSN 0
WLAN MAC 8844F6B152D9
HW 1001
RFIC 68
LCD TPO
BT 19e2-4702D
Asic 11
HW Signature F262EFD24F86092C
Simlock Server SIMLOCK SERVER
Simlock Key 0010100000000000
Simlock Profile 800000000004000B
Simlock Aux 000B0000
Simlock IMEI 00003583370528418600
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!ito na po finish product:x
wahahahaha....napasama pa cute kung mata ah...=))
)thanks po...sana po nag enjoy kayo sa kwento ko...
i love u ant, i love u all ant colony...:-*
