MyPhone My28/my28s Unified Firmware V4

[larongpating]

Description: Unified firmware was built in order to have an openline/standard firmware for the three versions of our device (My28/My28s/My28s-triband). Unified V4 is the compilation of all the fixes and some modifications of Unified V3..
Firmware change log:
-Corrected dev blocks
-TWRP included
-Some fixes and modifications on firmware files
-Some fixes and modifications on kernel files
ROM features/change log:
-Deodexed/Zipaligned
-Debloated
-Rooted with SuperSU Pro
-Busybox installed
-Init.d supported
-Some apps was replaced with CM12.1 apps
-Pre-patched services.jar (disabled signature verification)
-Preinstalled and Preactivated ABS Tweaks
-Insert sim bug fixed
-Updated GAPPS

Note: Other modifications will be added soon.

FLASH AT YOUR OWN RISK! Follow the instructions accordingly.

Requirements:
1. Windows PC
2. A working data cable for android. If you have an original samsung data cable, then use it.
2. SPRD NPI USB Driver - https://goo.gl/zechEP
3. Upgrade Download Tool - https://goo.gl/YB5dkD
4. MyPhone My28/s Unified Firmware V4 (Revised-3) - Download, save to PC and extract using WinRar - http://bit.ly/1NnCQQ9
5. Stock Launcher for Unified v4 - Download and save to SDcard
Chooose your desired Stock Launcher:
Launcher3 for Unified V4 - http://bit.ly/1W7YGdH
RevoLauncher for Unified V4 - http://bit.ly/1WHjw1U

How to flash?
1. Open SPRD NPI USB Driver > Production Line Version >Choose "amd64" if you're using 64 bits * choose x86 if you're using 32 bits (After this steps install the driver that compatible in your PC)
2. Open Upgrade Download (You can locate it in the SPRD Upgrade Tool Folder)
3. After you open Upgrade Download, Click LOAD PACKET
4. Then find the extracted folder of C22J_MY28_20160418_V4.18_Unified_V4_By_Team28Devs_Revised3.pac and click the pac file (Wait for a few seconds until the pac file will load)
5. After loading the pac file, click START DOWNLOADING (GEAR ICON)
6. REMOVE battery and insert it back
7. Hold Vol+ and Vol- button together, then connect your phone to PC via USB
8. If you see "IN PROGRESS" in the Upgrade Download Tool, you can now release the Vol+ & Vol- button
9. Just wait for a few minutes. When flashing is "PASSED" It means that flashing is successful
10. Remove your phone from PC, remove battery and insert it back, and boot to Recovery Mode (TWRP). Hold power button then immediately hold vol+ button, after 2 sec release the power button while holding the vol+ button
11. In TWRP, tap Mount and check "cache", "Data", "System", "Micro SDcard". Tap Storage: and select Micro SDCard
12 Go back to TWRP's Home menu and tap Wipe - Advanced Wipe and check "Dalvik Cache", "cache", "Data". Then Swipe to wipe
13 Go back to TWRP's Home menu and tap Install. Locate Launcher3_Unified_V4.zip or RevoLauncher_Unified_V4.zip from your SDcard and install it
14. Go back to TWRP's Home menu and tap Reboot - System
15. DONE! and wait for several minutes

HAPPY FLASHING!
-Special thanks to all the members of Team28Devs
God Bless you!!!!

 

[larongpating]

paalala po para lng po ito sa tatlong devices na myphone my28 , my28s at my28s triband lalakas din po ang signal nyo pag flash nyo nito at wla po syang bug sa sim thanks screenshot po.. kahit my28s sya my28 ang nakalagay pero wla nmn issue
sana maka help po sa mga need nito try and tested

 

[arcj]

my28s

boss my fix kaba ng walng isang signal peru my imei naman po...salamat

 

[flatdish2]

boss my fix kaba ng walng isang signal peru my imei naman po...salamat

Boss sa Setting lang yan..punta ka SETTING click SIM CARDS scrool down to Select Primary Card yung GLOBE or TM mo..ok na yan..:$

 

[larongpating]

sorry po nalimutan ko palang ilagay ito dun sa tutorials.. kasama po itong i flash sa custom recovery na twrp..
ito po un: http://www.4shared.com/zip/BstWDWpMba/data_fix_unified_v4_1_.html?
ang laman po nyan ay prodnv,wcnmodem,wdsp,wmodem.img lahat.. mapa sim one or sim 2 lalakas po ang signal tpos aayusin nya ung bug na minsan di mabasa ang simcard sana ma help kita pre @arcj
flash nyo lang pag katapos nong launcher na nsa taas salamat

 

[TAGZ19]

Slamat dito paps working po sya tnx ng mdami

[/IMG]

[/IMG]

 

[GEMICHA]

Description: Unified firmware was built in order to have an openline/standard firmware for the three versions of our device (My28/My28s/My28s-triband). Unified V4 is the compilation of all the fixes and some modifications of Unified V3..
Firmware change log:
-Corrected dev blocks
-TWRP included
-Some fixes and modifications on firmware files
-Some fixes and modifications on kernel files
ROM features/change log:
-Deodexed/Zipaligned
-Debloated
-Rooted with SuperSU Pro
-Busybox installed
-Init.d supported
-Some apps was replaced with CM12.1 apps
-Pre-patched services.jar (disabled signature verification)
-Preinstalled and Preactivated ABS Tweaks
-Insert sim bug fixed
-Updated GAPPS

Note: Other modifications will be added soon.

FLASH AT YOUR OWN RISK! Follow the instructions accordingly.

Requirements:
1. Windows PC
2. A working data cable for android. If you have an original samsung data cable, then use it.
2. SPRD NPI USB Driver - https://goo.gl/zechEP
3. Upgrade Download Tool - https://goo.gl/YB5dkD
4. MyPhone My28/s Unified Firmware V4 (Revised-3) - Download, save to PC and extract using WinRar - http://bit.ly/1NnCQQ9
5. Stock Launcher for Unified v4 - Download and save to SDcard
Chooose your desired Stock Launcher:
Launcher3 for Unified V4 - http://bit.ly/1W7YGdH
RevoLauncher for Unified V4 - http://bit.ly/1WHjw1U

How to flash?
1. Open SPRD NPI USB Driver > Production Line Version >Choose "amd64" if you're using 64 bits * choose x86 if you're using 32 bits (After this steps install the driver that compatible in your PC)
2. Open Upgrade Download (You can locate it in the SPRD Upgrade Tool Folder)
3. After you open Upgrade Download, Click LOAD PACKET
4. Then find the extracted folder of C22J_MY28_20160418_V4.18_Unified_V4_By_Team28Devs_Revised3.pac and click the pac file (Wait for a few seconds until the pac file will load)
5. After loading the pac file, click START DOWNLOADING (GEAR ICON)
6. REMOVE battery and insert it back
7. Hold Vol and Vol- button together, then connect your phone to PC via USB
8. If you see "IN PROGRESS" in the Upgrade Download Tool, you can now release the Vol & Vol- button
9. Just wait for a few minutes. When flashing is "PASSED" It means that flashing is successful
10. Remove your phone from PC, remove battery and insert it back, and boot to Recovery Mode (TWRP). Hold power button then immediately hold vol button, after 2 sec release the power button while holding the vol button
11. In TWRP, tap Mount and check "cache", "Data", "System", "Micro SDcard". Tap Storage: and select Micro SDCard
12 Go back to TWRP's Home menu and tap Wipe - Advanced Wipe and check "Dalvik Cache", "cache", "Data". Then Swipe to wipe
13 Go back to TWRP's Home menu and tap Install. Locate Launcher3_Unified_V4.zip or RevoLauncher_Unified_V4.zip from your SDcard and install it
14. Go back to TWRP's Home menu and tap Reboot - System
15. DONE! and wait for several minutes

HAPPY FLASHING!
-Special thanks to all the members of Team28Devs
God Bless you!!!!

Meron kang mediafire o 4shared link bro? hirap kasi magdownload sa mega

 

[Chubychubz]

 

[mhelvz011]

downloading salamat..

 

[mentos28]

Boss No Service (No Signal) Paano Fix Nito? Maraming Salamat