SCV31 Unlocking TESTED 1000% [ INFO HERE]

FullFlash2014

Registered
Joined
Jun 12, 2014
Messages
4,477
Reaction score
241
Points
381
Location
Baguio City
KDDI AU G925J scv31 6.01 version

1..............*#0011# pag nag pass sure nayan na puwede.
2............. lista mo orig imei ng phone..very important


START NA

Files you need, thanks to vietmobile.vn for sharing:
https://drive.google.com/file/d/0B7M...w?pref=2&pli=1
Password:fullscv31

BEFORE DOING ANYTHING, WRITE DOWN THE ORIGINAL IMEI # somewhere. Make sure you know the original IMEI


1). Flash Combination file using Odin. After flashing, phone will be in Factory Binary Mode. Tab one Android logos at the bottom of the screen to get to dial pad and enter *#0808# and select DM+MTP+ADB then OK.


2). Use Z3X, select the SCV31 model and go to Repair tab and press on Reset MSL.


3). Write down the phone's original IMEI# somewhere and save it. Use SPT box and go to Service tab and in Repair IMEI, enter this super IMEI : 358012060753038 (this is an original factory unlocked IMEI) Use C3300 UART cable and write new IMEI to phone. After it finished, check to make sure you have the new IMEI in phone.


4). Flash FULL flash files (BL, AP, CP, CSC) and no need PIT file, using Odin.


5). After flashing full flash files, inset any SIM card, phone boots up and go to WIFI and turn on. Go to Settings>>About>>SIM card status. You should see Status: Not allowed. Tab on "Update SIM card status" at the bottom of the screen then wait until it finished and reboot. Go back to SIM card Status again and see if it shows Status: Allowed. If it is, then you're good to go to the next steps.


6). Repeat Step 1,2, and 3, except in Step 3, enter phone's ORIGINAL IMEI. After all steps done, check to make sure you have original IMEI in phone now.


7). Now flash FULL flash files (BL,AP,CP,CSC) again. After flashing is done, phone should be now UNLOCKED.


If you want to remove AU Japanese contents in ROM, you can flash this SPACX ROM using Odin:


https://www.androidfilehost.com/?fid=24052804347770225

NOTE: KAILANGAN GAWIN MO LAHAT YANG NAKA SULAT
PAG MALI KA ISA MAGING PALPAK DIN ANG PAG UUNLOCK MO


SMALL LOGS HABANG GINAGAWA

Please Wait Enter Test Mode ...
Enter Test Mode OK!
Model Name: SM-G925J
S/W Version: FA50_SCV31KDU1AOE1
Phone SN: 0000000000
IMEI: 35801206047963
Repair New IMEI: 358012060753038
Exit Test Mode ....
All Jobs Done.
Total Time: 22.74 s




Operation: Reset MSL
Selected model: SCV31
Selected port: COM36 SAMSUNG Mobile USB Serial Port
Software version: 27.0

Reading phone info...
Reading IMEI... ok
IMEI: 358012060753038
Reseting MSL security... ok
Reseting... ok
Reset MSL done

Done with Samsung Tool PRO v.27.0


Please Wait Enter Test Mode ...
Enter Test Mode OK!
Model Name: SM-G925J
S/W Version: FA50_SCV31KDU1AOE1
Phone SN: 0000000000
IMEI: 35801206075303
Repair New IMEI: 358012060479634
Exit Test Mode ....
All Jobs Done.
Total Time: 23.96 s


TESTED 100000000000000%

3K PESOS NAGAMIT RIN ANG OLD SPT BOX

AYUS
 
Last edited by a moderator:
KDDI AU G925J scv31 6.01 version

1..............*#0011# pag nag pass sure nayan na puwede.
2............. lista mo orig imei ng phone..very important


START NA

Files you need, thanks to vietmobile.vn for sharing:
https://drive.google.com/file/d/0B7M...w?pref=2&pli=1
Password:fullscv31

BEFORE DOING ANYTHING, WRITE DOWN THE ORIGINAL IMEI # somewhere. Make sure you know the original IMEI


1). Flash Combination file using Odin. After flashing, phone will be in Factory Binary Mode. Tab one Android logos at the bottom of the screen to get to dial pad and enter *#0808# and select DM+MTP+ADB then OK.


2). Use Z3X, select the SCV31 model and go to Repair tab and press on Reset MSL.


3). Write down the phone's original IMEI# somewhere and save it. Use SPT box and go to Service tab and in Repair IMEI, enter this super IMEI : 358012060753038 (this is an original factory unlocked IMEI) Use C3300 UART cable and write new IMEI to phone. After it finished, check to make sure you have the new IMEI in phone.


4). Flash FULL flash files (BL, AP, CP, CSC) and no need PIT file, using Odin.


5). After flashing full flash files, inset any SIM card, phone boots up and go to WIFI and turn on. Go to Settings>>About>>SIM card status. You should see Status: Not allowed. Tab on "Update SIM card status" at the bottom of the screen then wait until it finished and reboot. Go back to SIM card Status again and see if it shows Status: Allowed. If it is, then you're good to go to the next steps.


6). Repeat Step 1,2, and 3, except in Step 3, enter phone's ORIGINAL IMEI. After all steps done, check to make sure you have original IMEI in phone now.


7). Now flash FULL flash files (BL,AP,CP,CSC) again. After flashing is done, phone should be now UNLOCKED.


If you want to remove AU Japanese contents in ROM, you can flash this SPACX ROM using Odin:


https://www.androidfilehost.com/?fid=24052804347770225

NOTE: KAILANGAN GAWIN MO LAHAT YANG NAKA SULAT
PAG MALI KA ISA MAGING PALPAK DIN ANG PAG UUNLOCK MO


SMALL LOGS HABANG GINAGAWA




TESTED 100000000000000%

3K PESOS NAGAMIT RIN ANG OLD SPT BOX

AYUS

ameyzing
 
panu pag walang spt ska urt cable? my ibang way pba?
 
Who read this thread (Total readers: 0)
No registered users viewing this thread.
Back
Top