What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

j100ML HELP - MGA JTAG USER

Berdugo

Berdugo

Registered
Joined
Oct 30, 2014
Messages
1,127
Reaction score
19
Points
181
Mga boss n bihasa sa jtag

baka po may working J100ML kyo, P EXTRACT NG DUMP or baka po may DUMP kyo khit di working nung n try nyo,

pashare naman po....


or baka po may mag magmmgandang loob n mag pa extract ng WORKING J100ML

pra ma explore po natin kung bakit nmamatay at kung may posibiliting mabuhay ang mga J100ML n matagal ng

lumisan...


MANILA AREA PO... BASTA WORKING J100ML Willing po ako pumunta sa shop nyo at mang abala...

dala ko po tools ko... khit ako n mag extract... salamat po
 
UP up ko ito sa mga may TAG-J nplease help po kayo nangangailangan po ang ka AT natin



__________________
isa puso mo lang ang pagtira sa tahanang ANTGSM
 
up natin to,,, manila area,,,, pki tulong nmn po c boss..
 
Up up lang po... Pra sa ating lahat po ito...
 
up kona rin..kasi may tanggap din ako kaso walang dumps na makuha
 
JTAG Connection is not supported for this device
Z3X EasyJtag Software ver. 2.5.0.7

Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:2145 mV
CMD Active Level:2939 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 90014A48344732621101DC425250723C
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 07/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 3695333968
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _3695333968_20170212_1644.extcsd
Done.

UP UP LANG PO...

NEED DUMP DONATOR LOLS
 
up lang mga boss... pra sa ating lahat ito...
 
Meron sana ako nyan pati na rin ng sa SM-J100H kaso ang SM-J100ML ay natangay kasama sa pagkasira ng backup ko at SM-J100H na lang ang natira.
 
cliveraine05 said:
JTAG Connection is not supported for this device
Z3X EasyJtag Software ver. 2.5.0.7

Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:2145 mV
CMD Active Level:2939 mV
Box IO Level:3300 mV
CLK Rate:14000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 90014A48344732621101DC425250723C
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 07/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 3695333968
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _3695333968_20170212_1644.extcsd
Done.

UP UP LANG PO...

NEED DUMP DONATOR LOLS
Click to expand...

Yun problema..May pinout nga sa support pero wala naman Dumps :))
 
JTAG Connection is not supported for this device

MALABO PA SA NGAYUN
PAG DEAD TALAGA MMC
DEAD KALALABASAN
KAHIT MAY DUMP PA TAYO
 
UPDATE LANG PO SA J100ML

DEABOOT
ALIVE
DEADBOL ULIT (S FW ni Boss #########, hehehe... buo ang emmc pero failed sa flashing huhuhu...)

NEED KO PO NG FULL DUMP NG J100ML (Working Condition)

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 040170124137F9C6, ,FW Ver.: 01.58
CMD Pullup Level:2103 mV
CMD Active Level:2495 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 90014A48344732621101DC425250723C
EMMC CSD : D07F01320F5903FFFFFFFFEF8A4040DA
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 07/2015 Rev.0x1
EMMC NAME: H4G2b , S/N: 3695333968
EMMC NAME (HEX): 48344732622000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x08] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x08.
H/W reset function [RST_N_FUNCTION]: 0x00
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G2b _3695333968_20170216_0314.extcsd
Done.

Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2103 mV
CMD Active Level:2495 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Reading 0x000020000000 bytes from 0x000000000000 ...ROM2 ( BOOT1 ROM)
Read Length has been corrected to 0x000000400000 bytes...
Output file :C:\Users\BackUp\Desktop\EMMC_ROM2_H4G2b_3695333968_00000000_00400000.bin
Done. Read Speed: 1422 kB/s

Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2103 mV
CMD Active Level:2495 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Reading 0x000020000000 bytes from 0x000000000000 ...ROM3 ( BOOT2 ROM)
Read Length has been corrected to 0x000000400000 bytes...
Output file :C:\Users\BackUp\Desktop\New folder\EMMC_ROM3_H4G2b_3695333968_00000000_00400000.bin
Done. Read Speed: 1437 kB/s

Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2103 mV
CMD Active Level:2495 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Reading 0x000000400000 bytes from 0x000000000000 ...ROM1 ( USER ROM)
Output file :C:\Users\BackUp\Desktop\New folder\EMMC_ROM1_H4G2b_3695333968_00000000_00400000.bin
Done. Read Speed: 1344 kB/s

Z3X EasyJtag Software ver. 2.5.0.4
Skip loading eMMC Addon Firmware
CMD Pullup Level:2103 mV
CMD Active Level:2495 mV
Box IO Level:2800 mV
CLK Rate:21000 khz
Reading 0x000000400000 bytes from 0x000000000000 ...ROM2 ( BOOT1 ROM)
Output file :C:\Users\BackUp\Desktop\New folder\EMMC_ROM2_H4G2b_3695333968_00000000_00400000.bin
Done. Read Speed: 1430 kB/s

MAY TSABA MGA SIR...

sJIGNEe.jpg


o3w5paM.jpg
 
FullFlashâ„¢ said:
JTAG Connection is not supported for this device

MALABO PA SA NGAYUN
PAG DEAD TALAGA MMC
DEAD KALALABASAN
KAHIT MAY DUMP PA TAYO
Click to expand...

tama posi sir fullflash
nag atempt na rin po ako dump sa buhay na UNIT
flash ko sa dead nothing happens deads pa rin :D
isa nalang di ko na gagawa palit emmc

emmc pro same din pero just in case mag success post ko
agad.. :D:D
 
SKhynix emmc/chip NOT YET 100% SUPPORTED

wala pa po talagang real/100% ISP jtag solustion specialy sa j100h/j100ml :(

naka ilang try na akong unit na ganito waley ni isa nabuhay gamit ang jtag tool like atf,easy,emmcpro. :(
 
You must log in or register to reply here.
Back
Top