Oppo R001 WIPE DATA & CACHE Failed Syndrome Done.

[Greed]

Pre-Requisite/Requirements:
-Oppo R1001
-Z3x Easy Jtag w/ Jpin ISP Adapter
-Usb Data Cable
-Soldering Led, Iron and Jumpire Wire

Easy Jtag Log:

Z3X EasyJtag Software ver. 2.5.0.8

Loading eMMC Addon Firmware... IO: 2800 mV
Box S/N: 19014017947348C1, ,FW Ver.: 01.58
CMD Pullup Level:1897 mV
CMD Active Level:2433 mV
Box IO Level:2800 mV
CLK Rate:1000 khz
HiPower mode is off!
---------- eMMC Device Information ----------

EMMC CID : 90014A4834473164040500A1AB5B8132
EMMC CSD : D02701320F5903FFFFFFFFEF8A4040D2
EMMC Manufacturer ID: 0090 , OEM ID: 014A
EMMC Date: 08/2014 Rev.0x5
EMMC NAME: H4G1d , S/N: 10595163
EMMC NAME (HEX): 48344731642000
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.6 (MMC 4.5)
Boot configuration [PARTITION_CONFIG: 0x48] Boot from:ROM2 (Boot Partition 1)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x00000000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: H4G1d _ 10595163_20170316_1206.extcsd
Done.

Running:JEDEC: Partitions config burn...
Z3X EasyJtag Software ver. 2.5.0.8
Skip loading eMMC Addon Firmware
CMD Pullup Level:1897 mV
CMD Active Level:2433 mV
Box IO Level:1800 mV
CLK Rate:1000 khz
Partition configuration:
No enhanced user data area
User partition write reliability: off
No GP1 partition
GP1 write reliability: on
No GP2 partition
GP2 write reliability: on
No GP3 partition
GP3 write reliability: on
No GP4 partition
GP4 write reliability: on
Partitioning successful, power-cycle to make effective
HW Parts Config Done.


Then Hard Reset Phone

For Partioning Emmc proceed to this TUT!
https://www.youtube.com/watch?v=4gV_Sa2N1mg

For Reference po mgaANT-TECHS! Sana makatulong​

 

[ANT-TATIKZ-GSM]

nice share boss

 

[JerbyGSM1988]

GANDA TALAGA JTAG PAPS,MAGKANO NBA JTAG NGAYON AT ANO

BA CHIPSET NG OPPO.

TY PO.
_______________________
BR.
JerbyGSM

 

[rexelens]

nilabas din sa wakas...applicable din kaya sa ibang unit to?

 

[Greed]

nilabas din sa wakas...applicable din kaya sa ibang unit to?

Yes, applicable po ito sa mga corrupted na HW Partition.

 

[Lanz]

tnx 4 sharing boss

 

[AcE01]

tnx for sharing boss

 

[jadezkey]

Woow nice boss

 

[RONEX]

god job boss nice thread keep it up

 

[rodge1985]

wahahah ganito rin yung sakin admited 1 week hanap solution hanggang RTO.

 

[acetech05]

z3x easy jtag pala ang katapat nyan.congrats. tanong lang sa mga nag jjtag no need replace mmc na yan.parang repair mmc
program then hard reset nalang. just asking only para malinawan.

 

[tazmaniand21]

matanong ko lang TS pano po yung pinout nya sa jtag?
Thanks..
Nakita ko na po yung pinout pasensya na.

 

[chard72]

nice share boss good job meron na dito ref...

 

[puppet26]

di na kailangan magflash ng dump boss?