Malaking kikitain nito - Pfsense firewall security for your home / office network

[THUNDERSTORM]

What is PFSENSE?

pfSense is an open source network firewall/router software distribution which is based on the FreeBSD operating system. pfSense software is used to make dedicated firewall/router for a network and it is considered for its reliability and offers many features which mostly found in commercial firewalls. Pfsense can be included with many third party free software packages for additional functionality.

As we are using many popular firewall’s in industry level such as Cisco ASA, Juniper, Check Point, Cisco PIX, Sonicwall, Netgear, Watchguard etc.. We can use the pfsense in free of cost with rich web interface to configure all our network components. pfsense supports traffic shapper, virtual ip, Load balancer and much more. It has several Diagnostics tool by default.

Hardware Requirements
• Pentium II Processor, 256MB RAM, 1GB of HDD Space, CD-ROM.
• 2 Ethernet Card’s, Pfsense ISO file.

Environment Setup

Installation Guide Download Here!​

What you need to do?
1. First visit the pfSense download page and select your computer architecture and platform. Here I’ve chosen “i368 (32-bit)†as my computer architecture and platform as “LiveCD with installer“, but in your case it would be different, make sure to select and download correct architecture for your system.

2. After selecting the architecture and platform, you will get a list of mirrors to download, make sure to select nearest mirror link to download the image from there.

3. After download completes, the downloaded image must be burn to an CD/DVD media as an ISO image before we start using it. You can use any CD/DVD burning software to burn the image to CD/DVD media.

If incase, you don’t have an CD/DVD drive, you can use Unetbootin tool to create a Live bootable USB media or if you don’t want to follow all these procedures, just go the pfSense download page, there you will get pre-created bootable pfSense images for you USB media, just go there and grab the “Live CD with installer (on USB Memstick)“. Don’t forget to select USB console type before downloading…

4. Now switch on or reboot the target machine, place pfSense CD/DVD or USB stick and set the BIOS options to your booting method (CD/DVD or USB) according to your choice and choose the boot options by pressing a keyboard function keys, usually F10 or F12, pfSense will start booting….

Note: the installation guide uploaded is password protected. Please hit thanks and pm for the password.

 

[jommil]

idol sir roel

 

[THUNDERSTORM]

idol sir roel

Yow Idol Sir jommil. salamat sa poh.

 

[r3nce]

salamat sir sa share

 

[STRYPER]

Salamat sa pag share boss

 

[denvz]

wow.. ayos to boss.. salamat sa pagbahagi.. pabulong ng pass.. tia po..

 

[CapsLock]

Buhayin ko lang yung thread na eto.

Pwedi po ba kahit walang external NIC?

For wan lang naman kasi gagamitan ko tanung ko sana kung pwedi na yung mismong built-in ethernet card sa MB ang gagamitin kung bridge adapter. meron kasi akung old gen na pc dito baka kaku pwedi.

 

[THUNDERSTORM]

Buhayin ko lang yung thread na eto.

Pwedi po ba kahit walang external NIC?

For wan lang naman kasi gagamitan ko tanung ko sana kung pwedi na yung mismong built-in ethernet card sa MB ang gagamitin kung bridge adapter. meron kasi akung old gen na pc dito baka kaku pwedi.

Kung WAN lang ang gagamitan pwede sir.

 

[ZOCHRALSKI]

wow ang galing ng CL ng cebu... astig

 

[Gashadow]

sir pahingi pass salamat malaking tulong to saakin....

 

[DIOMEL]

What is PFSENSE?

pfSense is an open source network firewall/router software distribution which is based on the FreeBSD operating system. pfSense software is used to make dedicated firewall/router for a network and it is considered for its reliability and offers many features which mostly found in commercial firewalls. Pfsense can be included with many third party free software packages for additional functionality.

As we are using many popular firewall’s in industry level such as Cisco ASA, Juniper, Check Point, Cisco PIX, Sonicwall, Netgear, Watchguard etc.. We can use the pfsense in free of cost with rich web interface to configure all our network components. pfsense supports traffic shapper, virtual ip, Load balancer and much more. It has several Diagnostics tool by default.

Hardware Requirements
• Pentium II Processor, 256MB RAM, 1GB of HDD Space, CD-ROM.
• 2 Ethernet Card’s, Pfsense ISO file.

Environment Setup

Installation Guide Download Here!​

What you need to do?
1. First visit the pfSense download page and select your computer architecture and platform. Here I’ve chosen “i368 (32-bit)†as my computer architecture and platform as “LiveCD with installer“, but in your case it would be different, make sure to select and download correct architecture for your system.

2. After selecting the architecture and platform, you will get a list of mirrors to download, make sure to select nearest mirror link to download the image from there.

3. After download completes, the downloaded image must be burn to an CD/DVD media as an ISO image before we start using it. You can use any CD/DVD burning software to burn the image to CD/DVD media.

If incase, you don’t have an CD/DVD drive, you can use Unetbootin tool to create a Live bootable USB media or if you don’t want to follow all these procedures, just go the pfSense download page, there you will get pre-created bootable pfSense images for you USB media, just go there and grab the “Live CD with installer (on USB Memstick)“. Don’t forget to select USB console type before downloading…

4. Now switch on or reboot the target machine, place pfSense CD/DVD or USB stick and set the BIOS options to your booting method (CD/DVD or USB) according to your choice and choose the boot options by pressing a keyboard function keys, usually F10 or F12, pfSense will start booting….

Note: the installation guide uploaded is password protected. Please hit thanks and pm for the password.

tnx bosing hingi po ng password

 

[masteronans]

sir pwede pabulong ng pasword