CloudFone Thrill Boost6.0 Firmware here :*

[jaytech]

Good day Share ko Lang po CloudFone Thrill Boost6.0 Firmware, tested by:Jaytech via Cm2

hit thanks po muna para iwas hit and run (l:0


Chinese Miracle II [MTK module] v 1.58

Scatter Load Ok , BaseBand : MT6580 , Project : v2800 , Storage : EMMC
Files found : 9 , Set to Flash : 8
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : CloudFone
Device Model : Thrill_Boost
Device CPU : MT6580
Device IntName : Thrill_Boost
Device Version : 6.0
Device Compile : 8/13/2016 7:54:45 AM
Device Project : ALPS.W10.24.p0
Device ExtInfo : Thrill Boost
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 8 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505071F47400D93C3
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x40000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505071F47400D93C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x1C5CD27784B77870703C70FEEDF14C40
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : v2800 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 4162 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase : 0x00000000050A0000-0x00000001CBEE0000
Flash Pre-Erase Done, time used : 00:00:03

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_v2800.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:04:47

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:08

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:05:23
Reconnect Power/Cable!











Link: https://www.4shared.com/rar/VGt0FcJAca/MT6580__CloudFone__Thrill_Boos.html

PASSWORD PROTECTED ,NO USEFULL POST, NO PASSWORD
Click triangle for password. or pm me

RESPECT EACH OTHER, Pasasalamat nalang po masaya na ako

We love you antgsm family.. taguig chapter keep it up

 

[Jakz09]

thanks for sharing..

 

[jaytech]

thanks for sharing..

Your Welcome po C.O Boss Jakz09 (l:0

 

[shanille]

tnx for sharing boss

 

[mhadz28]

magagamit ko rin to balang araw salamat sa pag sharing

 

[vortexph]

maraming salamat po boss!