Berdugo
Registered
- Joined
- Oct 30, 2014
- Messages
- 1,127
- Reaction score
- 19
- Points
- 181
Requirements:
1. ARDUINO Board (Any model)
2. 2pcs. 8x32(x4)
3. some programming skills
4. library for:
Adafruit_GFX.h
Max72xxPanel.h
5. soldering skills
CODE:
#include <SPI.h>
#include <Adafruit_GFX.h>
#include <Max72xxPanel.h>
int pinCS = 10;
int numberOfHorizontalDisplays = 1;
int numberOfVerticalDisplays = 8;
Max72xxPanel matrix = Max72xxPanel(pinCS, numberOfHorizontalDisplays, numberOfVerticalDisplays);
String tape = "PC CENTER & NETWORK SOLUTION - REPAIR & SERVICES... LAPTOP PC CELLPHONE TABLET"; // <<<<<<<<<<<<<< PALITAN NYO KUNG DI KYO MARUNONG MAG PROGRAM!!!! //
int wait = 100; // In milliseconds
int spacer = 1;
int width = 5 + spacer;
void setup() {
matrix.setRotation(matrix.getRotation()+3); //1 - 90 2 - 180 3 - 270
matrix.setIntensity(8);
}
void loop() {
for ( int i = 0 ; i < width * tape.length() + matrix.width() - 1 - spacer; i++ ) {
matrix.fillScreen(LOW);
int letter = i / width;
int x = (matrix.width() - 1) - i % width;
int y = (matrix.height() - 8) / 2;
while ( x + width - spacer >= 0 && letter >= 0 ) {
if ( letter < tape.length() ) {
matrix.drawChar(x, y, tape[letter], HIGH, LOW, 1);
}
letter--;
x -= width;
}
matrix.write();
delay(wait);
}
}
=)) FENIS NA
1. ARDUINO Board (Any model)
2. 2pcs. 8x32(x4)
3. some programming skills
4. library for:
Adafruit_GFX.h
Max72xxPanel.h
5. soldering skills
CODE:
#include <SPI.h>
#include <Adafruit_GFX.h>
#include <Max72xxPanel.h>
int pinCS = 10;
int numberOfHorizontalDisplays = 1;
int numberOfVerticalDisplays = 8;
Max72xxPanel matrix = Max72xxPanel(pinCS, numberOfHorizontalDisplays, numberOfVerticalDisplays);
String tape = "PC CENTER & NETWORK SOLUTION - REPAIR & SERVICES... LAPTOP PC CELLPHONE TABLET"; // <<<<<<<<<<<<<< PALITAN NYO KUNG DI KYO MARUNONG MAG PROGRAM!!!! //
int wait = 100; // In milliseconds
int spacer = 1;
int width = 5 + spacer;
void setup() {
matrix.setRotation(matrix.getRotation()+3); //1 - 90 2 - 180 3 - 270
matrix.setIntensity(8);
}
void loop() {
for ( int i = 0 ; i < width * tape.length() + matrix.width() - 1 - spacer; i++ ) {
matrix.fillScreen(LOW);
int letter = i / width;
int x = (matrix.width() - 1) - i % width;
int y = (matrix.height() - 8) / 2;
while ( x + width - spacer >= 0 && letter >= 0 ) {
if ( letter < tape.length() ) {
matrix.drawChar(x, y, tape[letter], HIGH, LOW, 1);
}
letter--;
x -= width;
}
matrix.write();
delay(wait);
}
}
=)) FENIS NA
Last edited by a moderator:
