I8262 Help

[maki_raw]

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: GT-I8262
Software version: 24.3

File analysis... OK
Total file size: 0x4C0B0938 (1216 Mb)
Searching USB Flash Interface... detected COM10
Setup connection... OK
Reading PIT from phone... OK
Sending oemsbl... OK
Sending appsbl... OK
Sending qcsbl.mbn... OK
Sending qcsblhd_cfgdata.mbn... OK
Sending appsbl... OK
Sending oemsbl... OK
Sending recovery.img... OK
Sending boot.img... OK
Sending persist.img.ext4... OK
Sending qcsblhd_cfgdata.mbn... OK
Sending system.img.ext4... error timeout

Done with Samsung Tool PRO v.24.3

saan po kya tama n2
nkailang firmware n aq ganon pa rin
same error

 

[GEMICHA]

Try mo sa odin boss.

Good luck

 

[maki_raw]

Try mo sa odin boss.

Good luck

its the same boss,
nakailang firmware n aq lhat same error,