DOWNLOAD CHERRY MOBILE FLARE Y3 TESTED FIRMWARE-By_PRINCEJHOMâ„¢

[PR1NCEJHOM]

PROBLEM / YUNIT : CHERRY MOBILE FLARE Y3 HANG IN LOGO , BIGLA NA LANG DAW SABI NI TUMER

TOOLS NEEDED ;

1.TESTED FIRMWARE (l:0
2.CM2 OR OTHER MTK FLASHER
3.USB DATA CABLE
4.PC LAPTOP


PROCEDURE :

1.DOWNLOAD FIRMWARE FROM THE GIVEN LINK----

2.OPEN CM2MTK MODULE, TICK ON FLASH TAB AND INPUT FIRMWARE THEN FLASH.

3.DONE FLASHING...

AFTER FLASH PO MAKIKITA NATIN ERROR PO SYA S USERDATA PERO NO PROB PO MGA KA ANT DISREGARD LANG PO NATIN ... THEN BOOT UP PHONE..

AYAN ETO NA PO SYA DITO LANG PO AKO MEDYO NAKULITAN KASI KAHIT FORMAT SA CM2 OR OTHER TOOLS HUMIHINGI PA RIN SYA NG PASS ... BALIK SA BASIC HARD RESET LANG PO PALA KATAPAT NYA )

DONE (l:0(l:0(l:0

CREDIT PO SA MAY ARI NG FILE SIR(-=jeovel=-)TESTED PO 100%



Cherry_Mobile_Flare_Y3_MT6580_8.1.0

PASSWORD : -=jeovel=-
-By_PRINCEJHOM™@ANTGSM.COM​

 

[2unGak]

Boss pashare naman po ng password need lang po.

masraming salamat po.

 

[cellton512]

CHERRY MOBILE FLARE Y3 TESTED FIRMWARE-By_PRINCEJHOMâ„¢.

PROBLEM / YUNIT : CHERRY MOBILE FLARE Y3 HANG IN LOGO , BIGLA NA LANG DAW SABI NI TUMER

TOOLS NEEDED ;

1.TESTED FIRMWARE (l:0
2.CM2 OR OTHER MTK FLASHER
3.USB DATA CABLE
4.PC LAPTOP


PROCEDURE :

1.DOWNLOAD FIRMWARE FROM THE GIVEN LINK----

2.OPEN CM2MTK MODULE, TICK ON FLASH TAB AND INPUT FIRMWARE THEN FLASH.

3.DONE FLASHING...

AFTER FLASH PO MAKIKITA NATIN ERROR PO SYA S USERDATA PERO NO PROB PO MGA KA ANT DISREGARD LANG PO NATIN ... THEN BOOT UP PHONE..

AYAN ETO NA PO SYA DITO LANG PO AKO MEDYO NAKULITAN KASI KAHIT FORMAT SA CM2 OR OTHER TOOLS HUMIHINGI PA RIN SYA NG PASS ... BALIK SA BASIC HARD RESET LANG PO PALA KATAPAT NYA )

DONE (l:0(l:0(l:0

CREDIT PO SA MAY ARI NG FILE SIR(-=jeovel=-)TESTED PO 100%



Cherry_Mobile_Flare_Y3_MT6580_8.1.0


-By_PRINCEJHOMâ„¢@ANTGSM.COM​

idol pa share naman ng password mo maraming salamat Poh.

 

[natemace]

boss pashare din ng password salamat....

 

[edmarie]

nice sharing boss .................

 

[PR1NCEJHOM]

nice sharing boss .................

salamat boss para sa ating mga ka ANT

 

[PR1NCEJHOM]

ang password po ay nasa ating mahiwagang tatsulok... kung masipag magbasa basa tyak makikita :
0

 

[dennis khyle]

boss pashare nman po ng password, salamat po malaking tulong po sating lahat, itong thresd na to

 

[grebenjun]

Bos pa share ng password tnx.

 

[PHONE CARE]

bossing pahingi ng password..thanks

 

[FixCorner]

boss pabulong ng password.. thanks

 

[funkleson15]

boss pa bulong ng password po

 

[generalhbk]

Pag ganyang status bossing pwde niyo siyang e "FORMAT/RESET SETTINGS" (FULL FACTORY RESET) kay CM2 tapos manghihinge npo siya nag account reset niyo lng via VOL - + POWER ON Rekta!

 

[PR1NCEJHOM]

Pag ganyang status bossing pwde niyo siyang e "FORMAT/RESET SETTINGS" (FULL FACTORY RESET) kay CM2 tapos manghihinge npo siya nag account reset niyo lng via VOL - + POWER ON Rekta!

Back read paps... inulit mo lang haha ✌

 

[generalhbk]

Back read paps... inulit mo lang haha ✌

Yung nka sulat sayo paps nag flash ka eh ))=))=))

PROCEDURE :

1.DOWNLOAD FIRMWARE FROM THE GIVEN LINK----

2.OPEN CM2MTK MODULE, TICK ON FLASH TAB AND INPUT FIRMWARE THEN FLASH.

3.DONE FLASHING...

Yung comment ko paps is "FORMAT/RESET SETTINGS" (FULL FACTORY RESET)" w/o flashing na
(Maybe para lang ito sa mahihina ang net or nag mamadaling tomer yung way ko or ez way nlng kung baga)

but btw congrats kasi ok na yung cp

 

[PR1NCEJHOM]

Yung nka sulat sayo paps nag flash ka eh ))=))=))



Yung comment ko paps is "FORMAT/RESET SETTINGS" (FULL FACTORY RESET)" w/o flashing na
(Maybe para lang ito sa mahihina ang net or nag mamadaling tomer yung way ko or ez way nlng kung baga)

but btw congrats kasi ok na yung cp

haha hindi naman lahat nadadale sa format lang paps ... syempre basic 1st ..doon muna tayo..

kaya nga nag flashing e... hindi kinaya sa format lang=)) (l:0

 

[jOesAp73]

Good day po. Ask ko lang po password nito. Ty po

 

[Kriel247]

Gdam. Boss, pwd po maka hingi ng password nito.. pwd po boss pa bulong.. salamat po..