DESIRA R7 LITE (hanglogo) done with firmware inside

[mahidfox]

share ko lang po ito tanggap ko desire r7 lite nka hang logo po sya
sinubukan ko muna po sya hard reset. ganon parin po hang logo parin sya. at sinubukan ko mag back up ng kanyang firmware. ganon parin po.kaya ginawa ko nag hanap po ako d2 sa tahanan ntin. buti nman at my nahanap po ako. at ayon hindi nman po ako nabigo.
. after download ko po sa kanya nag success po po. power off unit. then hold vol down po. bago saksak usb

======done by cm2mtk======

ito po firmware na ginamit ko http://www.mediafire.com/file/xcn9m...e_Desire_R7_Lite_MT6580_17042017_6.0.zip/file
sanamakatulong po sa iba. lalo na sa bagohan katulad ko.

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004548384344340115CB6B1B24E1
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 4DC8H
[eMMC] : FLASH_CID : 7001004548384344340115CB6B1B24E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C8000000
[eMMC] : FLASH_UCP : 7296 MiB [eMMC 8 GiB]
DEV RID : 0x74E6100C8C092853A8C72A7EB091A217
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : zechin6580_weg_m , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3995 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase : 0x00000000050A0000-0x00000001C1EE0000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_zechin6580_weg_m.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:05:01

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:23

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:05:45
Reconnect Power/Cable!

 

[alex93.]

Good day sir maraming salamat sa pag share..
kasu lng parang my mali ata Lodi..
nka
Solved
ang tread..
diba dapat reference..?

 

[mahidfox]

Good day sir maraming salamat sa pag share..
kasu lng parang my mali ata Lodi..
nka
Solved
ang tread..
diba dapat reference..?

tama po yan ser. solve kc solve po problema ko sa unit na yan at mapapansin po ntin nkalagay sa tittle ko. with firmware inside po.
paki edit nalang po master kung my mali po kayo na puna. salamat po master

 

[joemary]

tested by sp tool
system
cache
userdata only
iwas abuno