techseeker
Registered
- Joined
- Jun 16, 2014
- Messages
- 45
- Reaction score
- 3
- Points
- 1
una hard reset gamit ang volume down at power button.
sunod open nck then select sa chipset mt6580. boot key ay vol up and down para madetect.
load this file http://www.mediafire.com/file/z74scqmfw0cpefd/flare+s6+lite+dtv.rar then reset frp"]s6 lite dtv frp ty to orig file owner[/URL]
logs after loading file
Flash style: EMMC
BLOADER HEADER: MTK_BLOADER_INFO_v21
Preloader: preloader_t960w_v1_w_frog_m05c_h1240_fw.bin
Warning, boot not loaded.
Warning, recovery not loaded.
Warning, secro not loaded.
Warning, system not loaded.
Warning, cache not loaded.
Warning, userdata not loaded.
Block Size: 0x20000
punta ka sevice tab then tick reset frp
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM29)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E5832 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM28)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fc0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
sunod open nck then select sa chipset mt6580. boot key ay vol up and down para madetect.
load this file http://www.mediafire.com/file/z74scqmfw0cpefd/flare+s6+lite+dtv.rar then reset frp"]s6 lite dtv frp ty to orig file owner[/URL]
logs after loading file
Flash style: EMMC
BLOADER HEADER: MTK_BLOADER_INFO_v21
Preloader: preloader_t960w_v1_w_frog_m05c_h1240_fw.bin
Warning, boot not loaded.
Warning, recovery not loaded.
Warning, secro not loaded.
Warning, system not loaded.
Warning, cache not loaded.
Warning, userdata not loaded.
Block Size: 0x20000
punta ka sevice tab then tick reset frp
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM29)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : 00
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E5832 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM28)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fc0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
Last edited by a moderator:
