RAHNIAH
Registered
History
Dinala sakin ni tumer pinalitan daw ng anak ung password try ko sya ie wipe, DONE naman pero my FRP so nag hanap ako sa tahanan, pati na rin sa google at youtube WAEPEK lahat ng tricks, kaya naisip ko tirahin sa spflash tool using format method ayun nadali rin.
Download Link:
CLICK me
No password po to, Free for All po
Step 1. extract nyo muna ung firmware pati ung tools
Step 2. open Sp Flash Tool then load the scater
Step 3. go to format tab and click the manual format
Step 4. then input nyo eto Begin Address: 0x1bb800000 tapos eto naman sa Format Length: 0x400000000
Step 5. Open MCT bypass tool rev4
Step 6. turn off the phone and hold volume + and -
Step 7. Click Bypass, Malalaman nyo po pag bypass na kasi mag aapear din dun sa log ng MCT bypass Tool
Step 8. Go to spflash tool Option>Connection and tick URT
Step 9. Select nyo po ung com port nung phone nyo makikita nyo po kung anong number sa Device manager tapos set nyo po ung Baud Rate sa 921600
Step 10. Close nyo na ung Option Window then Click Format.
wait nyo lng hangang mag done. after nyan pwede na nyo ng ie next next wala ng FRP yan.
Sorry po kung Walang SS nag mamadali po si tumer
Sana po maka tulong thanks.
Dinala sakin ni tumer pinalitan daw ng anak ung password try ko sya ie wipe, DONE naman pero my FRP so nag hanap ako sa tahanan, pati na rin sa google at youtube WAEPEK lahat ng tricks, kaya naisip ko tirahin sa spflash tool using format method ayun nadali rin.
Download Link:
CLICK me
No password po to, Free for All po
Step 1. extract nyo muna ung firmware pati ung tools
Step 2. open Sp Flash Tool then load the scater
Step 3. go to format tab and click the manual format
Step 4. then input nyo eto Begin Address: 0x1bb800000 tapos eto naman sa Format Length: 0x400000000
Step 5. Open MCT bypass tool rev4
Step 6. turn off the phone and hold volume + and -
Step 7. Click Bypass, Malalaman nyo po pag bypass na kasi mag aapear din dun sa log ng MCT bypass Tool
Step 8. Go to spflash tool Option>Connection and tick URT
Step 9. Select nyo po ung com port nung phone nyo makikita nyo po kung anong number sa Device manager tapos set nyo po ung Baud Rate sa 921600
Step 10. Close nyo na ung Option Window then Click Format.
wait nyo lng hangang mag done. after nyan pwede na nyo ng ie next next wala ng FRP yan.
Sorry po kung Walang SS nag mamadali po si tumer
Sana po maka tulong thanks.
Last edited by a moderator:
