What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

936 Modem Need help

AGS

AGS

Registered
Joined
May 21, 2015
Messages
2,596
Reaction score
53
Points
381
Location
Lanao del sur
Problem: Power LED only

Ito yung LOGS ng pag flash ko success naman

727ix3.png

after flashing Usb mode ko Press power + wps + reset + saksak usb ayaw mag blue hintayin ako mga 3 mins red light at yung 2 bars na signal nalang.

pa help paano mag blue at makapasok sa usb mode.


Thank you.
 
Last edited by a moderator:
Sir naopen mo ba sa pc mo ang nakapasok ka ba sa modem tignan mo po baka naka disable ang signal niyan sir ....
Wari ko lang baka mag katulad sa pocket wifi
Kasi my dinala saakin red lang binuksan ko disabled lang signal kaya na enable ko

Baka ung mga settings hindi nak default kaya ganyan
 
Sir-Lester25 said:
Sir naopen mo ba sa pc mo ang nakapasok ka ba sa modem tignan mo po baka naka disable ang signal niyan sir ....
Wari ko lang baka mag katulad sa pocket wifi
Kasi my dinala saakin red lang binuksan ko disabled lang signal kaya na enable ko

Baka ung mga settings hindi nak default kaya ganyan
Click to expand...

nagreset na ako boss after ko ma reset power led nalang try ko e debrand ok naman sa flshing proceed ako step b. ayaw mag blue sa madaling salita ayaw pumasok sa usb mode.
 
after flashing ito ang sunod na step pero ayaw gumana sa akin.


Tuts for B315s-936 power light only.

working lang on following conditions:

1. Successful sa new openline ng 936 pero after ng reset e powerlight pa rin.
2. Unknown device sa Device manager - details - Hardware IDs - VID_12D1&PID_36DD.

Kung hindi mo naabot yung "Done/Remove battery and put it again" bka hindi gumana.

Steps:

1. Hard reset, either :
a. press power button at reset button then plug power, pag umilaw yung red, wag bitawan hanggang hindi nawawala ynug red.
b. pag hindi umilaw yung red, press power at wps buttons, pag umilaw yung red, wag bitawan hanggang hindi nawawala yung red.

2. Hintayin umilaw blue light at last two signal bars. wag galawin.
3. Hintayin umilaw red light at first and last signal bars. wag galawin.
4. Hintayin na power light na lang. plug usb to usb cord.
5. Check sa device drivers dapat may unknown o Android ADB Interface ka.
6. Ipilit and driver na - Android ADB Interface, mag have disk ka. piliin mo yung nasa folder adb_driver_windows
7. Go to run then CMD. - Change ka sa directory kung saan mo inextract yung files - "CD c:\files"
Dapat yung cmd mo "c:\files>"

8. Sa CMD, type
fastboot -i0x12d1 getvar product
9. Dapat may magpakita na - product: balongv7r2
10. Sa CMD ulit, type
fastboot -i0x12d1 erase nvimg
11. Dapat may response na "OK".
12. Sa CMD ulit, type
fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
13. Dapat may response na "OK".
14. Reboot na :)
 
kung need nnyo ang 936 openline marmi po tau mga master e2 number q 09121113131
 
ganyan mga polko firmware nag red ligths din sakin buti na ayos ko pa peru naka limutan ko na, basta alam ko lang short mo terminal balong at sa firmware na gagamitin mo i tried many times peru sa middle east gumana ang 936 ko, pag polko gamit ko firmware ayaw kahit mag adb kapa, kung ako sau try mo lahat firmware kung saan hiyang 936 mo, sakin naka middle east firmware na 936 ko malakas pa sumagap signal di ko na binalik sa polkko


ito pala guide nakuha ko lang to peru my edit ako kunti dyan para mas malinaw

0.short two terminal

1. Open Balong USB Downloader
- Click Detect
- Locate usblsafe-b315.bin
- Load
- Pag 100% na close.

2. Open Firmware Folder
- Click go_hdlc
- Enter

3. Open Huawei R215 Flash
- Locate 3G PC UI Interface (select)
- Flash
- Locate middle east v21.300 ang firmware.hmf file
- Antayin na may nakasulat na Done/Remove battery and put it again..
- Close

4. Unplug Power, Unplug USB, unplug Flasher

Step 2.

1. plug power hold press reset and power button,white and red , white and blue leds will appear and white and red leds lights will appear until only white power led will appear and you can see on devicemanager samsung android adb driver will detect

2. Extract folder files to C:\files
inside the folder press shift right click chose open command window here

3. Sa CMD, type
fastboot -i0x12d1 getvar product
4. Dapat may magpakita na - product: balongv7r2

5. Dapat may response na "OK".
6. Sa CMD ulit, type
fastboot -i0x12d1 flash fastboot fastboot-b315-baderase.bin
7.unplug and replug
 
Last edited by a moderator:
boss pakiadd mo ako sa fb at itry natin gawin yan
..

try mo muna ito..

di ba ung lumang 936 yan?

baka dito sa banda na ito need mo gawin..


3) Mapapansin niyo after ng AT^RESET power light nalang po ang iilaw isetup po yung ipv4 settings ng lan

IP= 192.168.1.100
Subnet Mask= 255.255.255.0
Gateway= 192.168.1.1
Preferred DNS= 192.168.1.1 yung sa baba secondary blank na then ok

4) Pagkasetup po ng ip tanggalin adaptor at usb male to male cable sa pc

5) Run B593s-22 Multicast Upgrade tool select firmware ni sir jessiartigas eto po download link
http://www.mediafire.com/download/u0...ei+debrand.zip
no password na po nireup ko po extract lang zip file at select yung bin file sa multicast

6) Start Multicast Upgrade Tool tapos saksak adaptor lang ng 936

7) Mag flaflashing yan mag steady blue sa una then magbliblink ng white theng turn to kulay green w8 niyo lang mga 5 mins lahat po
basta hintay lang po di naman po sobrang tagal hehe

8)After Mag kulay green led status ng 936 stop na po yung multicast upgrader and close na po

9)Saksak USB male to male sa pc then run cid reader select com port ui mo then input mo mga command na ito

AT^SFM=0 - lalabas ng factory mode
AT^RESET - reboot modem
 
You must log in or register to reply here.
Back
Top