DOWNLOAD Acer Liquid E600 Hang Logo DONE CM2 flashing

[Summer19]

Acer Liquid E600 hang sa logo hinde nakawala sa CM2 flashing Qualcom

Paalala muna:
isa po sa experence ko sa celpone na ito pag once na pinindot mo ang volume down sa flashing na hine nadetect ng pc, mahirap na po xang buhayin pero dont worry pindotin uli ang volume down sabay power switch pag nag vibrate bitawan na dahil buhay xa uli, pwde rin tanggal battery salpak battery, bweno proceed na ako sa flashing.

Flashing:
poress vup vdown sabay para madetect sa flashing dapat naka install c driver.

ito po ang logs:


Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...

Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26/28]
ID_BLOCK_S : 05A286A6
ID_BLOCK_I : 008050E1
ID_BLOCK_L : 23C5BF47F67C69644338D8C50259D9F1
ID_BLOCK_L : 7914BA15068931B257A6EB2022CDDBE0
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x26 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!


Brand : acer
ProdName : e600_aap_gen1s
ProdModel : E600
Device : e600
AndroidVer: 4.4.2
Manufact. : Acer
QLMxCPU : MSM8226

DevInfo : MSM8226__Acer__acer__ANDR_v4.4.2__E600__e600__e600_aap_gen1s

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : ddr.bin
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : fs_gc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x26 / eMMC
Firmware Size : 1036 MiB

Done!
Elapsed: 00:03:13

Reconnect Power/Cable!

Loading firmware ...
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand : acer
Device Manufact.: Acer
Device Model : e600
Device CPU : MSM8226
Device IntName : e600_aap_gen1s
Device Version : 4.4.2
CU_SWVer : Acer
Device Compile : 10/20/2014 4:33:28 AM
Device ExtInfo : E600
Load Ok!

Operation : Flash [ v1.15 ]
ForceFlashing : Enabled

Verify FW package ...
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26/28]
ID_BLOCK_S : 05A286A6
ID_BLOCK_I : 008050E1
ID_BLOCK_L : 23C5BF47F67C69644338D8C50259D9F1
ID_BLOCK_L : 7914BA15068931B257A6EB2022CDDBE0
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x26 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Flash Chain : 26
Flashing now

Flashing : gpt_main0.bin
Flashing : NON-HLOS.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : deploy.mbn
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : boot.img
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : system.img
Flashing : persist.img
Flashing : cache.img
Flashing : recovery.img
Flashing : misc.img
Flashing : fs_gc.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data ...

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:03:46

Reconnect Power/Cable!

ito po ang timpla niya:
http://www.mediafire.com/file/lt9nu...__ANDR_v4.4.2__E600__e600__e600_aap_gen1s.rar

Pass: pasalamat ka kung nakatulong

HUWAG NA PO AKO E PM HIT THANKS LANG NASA TATSULOK PO ANG PASSWORD

Salamat po sa viewing.​

 

[MUISES05]

boss sira yong flash file mo

 

[kimbryce25]

thanks sa fimware mo boss
not repair etong recieve ko error sa flashing emmc ata may tama

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26/28]
ID_BLOCK_S : 05A694CC
ID_BLOCK_I : 008050E1
ID_BLOCK_L : D92B41BD1886B3BE69DE361FD8A3331B
ID_BLOCK_L : 7D10BE11028D3DB64BAAEF242EC1DFFC
Pickup loader from firmware package
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8x26 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!

Files in Chain : 20
Flashing now

Flashing : gpt_main0.bin
ProgStart : start 0, num 34
ProgFinish : Read back verify failed at sector 1704685558,num sectors 0
Flash Error , Wrong ACK message! Bad File or eMMC fault?

Error : Flashing failed!
Check previous message for more info!

Reconnect Power/Cable!

 

[mysteriuzo]

boss paupdate po nung firmware corrupted po badly needed lng po salamat....

 

[r_one]

Boss pashare din po ng pass. Tia po.

 

[saxkhea]

boss pwdi pa bulong pass? salamat

 

[djmadz]

saan po pass nito boss pasoyo po naman