dogtrax2k
Registered
Acer liqiud z630 T03 Firmware Yan galing po yan kay google salamat pareng google
at NCK CRACK pwede nyo gamitin yan po ginamait ko.
Salamat nadin po sa mga thread na nakita ko hehehe nainip na kaya punta ako kay pareng google...... walang balita eh...
ito po SS
Info......
Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48414732 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: ee73cae84a02cb0
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: ee73cae84a12db6
If this phone have OTP IMEI, this is normal.
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
Flash files count is :11
Action : Firmware update.
Selected 0-By CPU: MT6735
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48414732 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM20)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.
Flashing ito na po
DONE....... Tapos ang kwento.... use trianlge
at NCK CRACK pwede nyo gamitin yan po ginamait ko.
Salamat nadin po sa mga thread na nakita ko hehehe nainip na kaya punta ako kay pareng google...... walang balita eh...
ito po SS
Info......
Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48414732 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: ee73cae84a02cb0
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: ee73cae84a12db6
If this phone have OTP IMEI, this is normal.
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
Flash files count is :11
Action : Firmware update.
Selected 0-By CPU: MT6735
Exe version: NCKDongle AndroidMTK 2.5.6.2
Scenario: Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147326505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48414732 : 000000000000000000
EMMC UA SIZE: 0x3ab800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac400000 [14.691 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM20)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Send preloader...
Download firmware to flash now...
Wait untill phone will start charging.
All done.
Flashing ito na po
DONE.......
Tapos ang kwento.... use trianlge
