Model: Alcatel 4027a
Problem: Network Lock (galing New Zealand)
Tools: NCK Crack 2.5.6.2
Logs:
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: OT-4027A
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM6)
Block Size: 512
MODEL FROM PROINFO: 4027A-2AL1NZ1
SECRO FROM PROINFO: X6D0MW02AZ10
IMEI marker was found in nvram
OTP ADRESS: 0xffff0200
OTP IMEI[1]: 014552003708785
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:86) Code : 6008961985098661
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.
Screenshot:
sensya na po wala po ung unit, papunta pa batangas ung my ari eii sana po maka tulong s inyo.
Problem: Network Lock (galing New Zealand)
Tools: NCK Crack 2.5.6.2
Logs:
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.6.2
Selected phone: OT-4027A
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 11010030303447 : 000000000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM6)
Block Size: 512
MODEL FROM PROINFO: 4027A-2AL1NZ1
SECRO FROM PROINFO: X6D0MW02AZ10
IMEI marker was found in nvram
OTP ADRESS: 0xffff0200
OTP IMEI[1]: 014552003708785
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:86) Code : 6008961985098661
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.
Screenshot:
sensya na po wala po ung unit, papunta pa batangas ung my ari eii sana po maka tulong s inyo.