alcatel one touch 7047e unlock by read codes

[sewren]

alcatel one touch 7047e unlock by read codes
lock sa sun

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.5.2
Selected phone: OT-7047E
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM5)
Phone detected...Please wait
Sending DA agent, please wait...
BBCHIP MT6582_S00
EMMC: (29Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 10:00:00:00:00:00:00:00
EMMC CID: FE014E50305858585810F143B1BC81F1
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
Detected : DA USB VCOM Port (COM6)
MODEL FROM PROINFO: 7047E-2ASPPH1
SECRO FROM PROINFO: X2C0ST02AR20
IMEI marker was found in nvram
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
IMEI[1] from NVRAM: 45f5090d0e1e56a
If this phone have OTP IMEI, this is normal.
Reading security, wait...

IMEI[1] : 864356021528352
SIM [1]
Block1(N): Locked (remain:3) Code : 3030029698
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked

IMEI[2] : 864356021528394
SIM [2]
Block1(N): Unlocked
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
...............
...............
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.