alcatel onetouch 4015N
post ko lang mga boss my password ang unit..
history:
dinala ni tumer sa shop my password binigay lang daw sa kanya ng boss nya sa work sya na daw bahala
mag pa tangal ng password kaya ginawa ko try ko hardrest sa kasamn ayaw gomana ng mga vull nya kaya ito
ginawa ko mtk na mn sya try ko sya sa NCK CRACK..
tool:
NCK CRACK
1.service
2.phone sittings
MTK 6572_NAND
3.format option
format Userdata
click Execute
ito tignan mo sa pic..
ito log:
ito na sya next next nyo lang
DONE for reference lang mga boss sana maka tolong
post ko lang mga boss my password ang unit..
history:
dinala ni tumer sa shop my password binigay lang daw sa kanya ng boss nya sa work sya na daw bahala
mag pa tangal ng password kaya ginawa ko try ko hardrest sa kasamn ayaw gomana ng mga vull nya kaya ito
ginawa ko mtk na mn sya try ko sya sa NCK CRACK..
tool:
NCK CRACK
1.service
2.phone sittings
MTK 6572_NAND
3.format option
format Userdata
click Execute
ito tignan mo sa pic..
ito log:
Code:
Action : Format UserData.
Selected 0-By [COLOR=Red]CPUM 0-By CPUMT6572_NAND[/COLOR]
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port [COLOR=Blue](COM8)[/COLOR]
Phone detected...Please wait
Sending DA agent, please wait...
[COLOR=Yellow]BaseBand CPU[/COLOR] :MT6572_S00
[COLOR=Yellow]BaseBand CPU Secure Version [/COLOR]: FF
[COLOR=Yellow]BaseBand CPU Bootloader Version[/COLOR] : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A : 000000000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM10)
Detecting format adress....wait!
FORMAT EMMC FLASH : BEGIN: 0x54480000 - [COLOR=Red]LEN: 0x9200000 [/COLOR]
FORMAT EMMC FLASH : BEGIN: 0x5d680000 - [COLOR=Red]LEN: 0x88200000 [/COLOR]
Phone can start slow at first power on
If phone stuck on logo, perform wipe from recovery.
First start can take up to 5 min on some phones.
Wait untill phone will start charging.
[COLOR=Cyan]All done.[/COLOR]ito na sya next next nyo lang
DONE for reference lang mga boss sana maka tolong
Last edited by a moderator:
